Results 1 to 10 of 10
  1. #1
    joggemann's Avatar
    Join Date
    Aug 2010
    Location
    Denmark. 7400 Herning
    Posts
    27

    "R&D Stage 1 engine andbody Kit - Looking for more acceleration"

    I use the ski for Race on flat and rough water.
    My GPS say 73.9 Mph (Garmin GPS) Rpm 8100 - Boost at 12-13 Psi
    i need more power for hole shot...


  2. #2
    Take the time to smile sirbreaksalot's Avatar
    Join Date
    Jun 2007
    Location
    Brisvegas
    Posts
    4,166
    +1
    602
    More info required ??
    Ride plate
    Prop
    intake grate
    etc

    What combo DO you have NOW

    so we can see what changes to offer

    Waz

  3. #3
    nicjak's Avatar
    Join Date
    Mar 2008
    Location
    Warragul, Downunder
    Posts
    7,794
    +1
    625
    waz sounds like he has everything covered only way he is going to get more low end is with some major engine work ie. pistons, rods, etc. my opinion be happy where you are after all you are trying to race a tugboat like the rest of us.

  4. #4
    Fat Man, Little Boat Region8Ultra250X's Avatar
    Join Date
    Jun 2007
    Location
    Jersey
    Posts
    5,563
    +1
    169
    any takers on if we will see another thread asking the same thing tomorrow with a different title..... there is already 3 or 4 others just like it.... from the same person

  5. #5
    nicjak's Avatar
    Join Date
    Mar 2008
    Location
    Warragul, Downunder
    Posts
    7,794
    +1
    625
    Yep kind of gives you the shits we ride big heavy ski's we arent going to better what we now have unless we spend big $$$ on hulls and major mods. in simple you want speed by a yamaha or seadoo you want a ski for the rough buy a kawasaki simple for some isnt it and all this info has been around for the past few years. f$%k im tired.

    Quote Originally Posted by Region8Ultra250X View Post
    any takers on if we will see another thread asking the same thing tomorrow with a different title..... there is already 3 or 4 others just like it.... from the same person

  6. #6
    Offshore Aussie's Avatar
    Join Date
    Jan 2010
    Location
    South East Australia
    Posts
    555
    +1
    1
    Pump nozzle ring kit ? Hole shot better top end not. RRated ?

  7. #7
    jmatak9's Avatar
    Join Date
    Jul 2009
    Location
    St. Cloud, Fl
    Posts
    435
    Quote Originally Posted by joggemann View Post
    I use the ski for Race on flat and rough water.
    My GPS say 73.9 Mph (Garmin GPS) Rpm 8100 - Boost at 12-13 Psi
    i need more power for hole shot...
    Repitch your prop to a 16/22, you wll have sick acceleration!! (hold on) but wil lose about 2 mph in top speed

  8. #8
    What about a Riva rideplate? Should offer a bit more speed and possibly quicker to plane. I already recommended 4* timing advance and dual feed intercooler mod. That and the prop repitch should improve acceleration. Vortex/etc seems pointless after spending money on the 1-1.

    I think you have the wrong ski buddy. - this is a ski for rough offshore conditions not fast flat water You could try to sell it to a private individual or else revert to stock and trade in to dealer and sell parts here. I for one would consider buying the R&D plate, grate, and sponsors. I'm sure someone would consider the pulley/etc.

    Buy a SeaDoo RXP/-X or a FZR. That's all I can say to help you. If you had spent this much on an RXP you would probably be going 80mph already.

  9. #9
    jmatak9's Avatar
    Join Date
    Jul 2009
    Location
    St. Cloud, Fl
    Posts
    435
    joggemann, what did you do? anything? if you do something and get results, let us know. Thanks

  10. #10
    JET250's Avatar
    Join Date
    Jan 2008
    Location
    Australia mate fair dinkum.
    Posts
    1,278
    +1
    2
    Quote Originally Posted by joggemann View Post
    I use the ski for Race on flat and rough water.
    My GPS say 73.9 Mph (Garmin GPS) Rpm 8100 - Boost at 12-13 Psi
    i need more power for hole shot...
    get a different prop or a motec.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Rebuild of 15F Racing Engine-What to look for
    By pro1200 in forum Kawasaki PWC Performance (4-stroke)
    Replies: 12
    Last Post: 11-30-2014, 12:58 PM
  2. Engine Hoist & Lift Sling for Hull Maint.?
    By tomhigh in forum Shops, Tools and Tricks
    Replies: 4
    Last Post: 03-06-2007, 09:38 AM
  3. RXT w/ Riva stage 1 or 2 kits questions
    By Mark S in forum 4-Tec Performance
    Replies: 7
    Last Post: 02-21-2006, 05:16 PM
  4. How are your Rotax Racing Stage I kits running for you?
    By Jarrett in forum 4-Tec Performance
    Replies: 6
    Last Post: 10-22-2005, 08:14 PM
  5. Have stage I minus the prop, looking for more mods..
    By 05rxt in forum 4-Tec Performance
    Replies: 17
    Last Post: 06-08-2005, 07:07 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •