Results 1 to 3 of 3
  1. #1

    Join Date
    May 2009
    Location
    Miami, Florida, United States
    Posts
    306
    +1
    4

    HOW TO two sensors on one display

    SO. I was not happy with sticking my head in the hull to look at the Fuel pressure regulator when I needed to adjust pressure.

    so I removed the gauge off the RFPR and replaced with DYNOTUNE digital gauge below




    Use a double pole double throw switch (two position),

    Your Boost , Fuel ,and display all have four wires blue, black, white,brown


    The easy ones first tie all the Blue wires together and hook up as you would normally like the single gauge how to calls for. same with the brown wire..

    Take the white wire & black wire from the display and hook up to the center screws on the switch

    take the white and black from the boost sensor and hook up to one side of the switch

    take the white and black from the fuel sensor and hook up to the other side of the switch

    Pretty simple. I hooked my switch up to the other side where the Hour/Volt button is..


    Sorry it got dark so i could not show you the waterproof cover for switch

    Fuel Pressure


    Boost


  2. #2
    Nothing like getting air, while sitting in a chair VonnerNIX's Avatar
    Join Date
    Jul 2010
    Location
    St. Louis, MO
    Posts
    90
    Very impressive thought. And great article!

  3. #3

    Join Date
    May 2009
    Location
    Miami, Florida, United States
    Posts
    306
    +1
    4
    Thanks! sorry it was more detail i was fighting a storm and night.... and it was my first HOW TO..

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How to remove plug on exhaust for o2 sensor
    By h2jim in forum Yamaha PWC Performance (4-stroke)
    Replies: 7
    Last Post: 07-28-2016, 06:39 AM
  2. How to fix a Sun damaged Display/gauge on a 04 RXP
    By Derek45 in forum Sea Doo How To & FAQs
    Replies: 2
    Last Post: 03-23-2014, 03:54 PM
  3. How to post pics on my thread?
    By yellow4 in forum 4-Tec Performance
    Replies: 2
    Last Post: 06-14-2007, 11:12 PM
  4. How to video tutorial on mounting the reg.# decals
    By SideFX in forum Sea Doo Open Discussion
    Replies: 0
    Last Post: 04-03-2007, 03:21 AM
  5. How to swap props on a zieman trailer
    By ou812 in forum 4-Tec Performance
    Replies: 9
    Last Post: 03-23-2007, 11:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •