Results 1 to 4 of 4
  1. #1

    Join Date
    May 2009
    Location
    nyc
    Posts
    684
    +1
    7

    the source of all my problems

    the whole cause of all the problems except the hood i have had with my ski was a drain plug gasket. i bought the ski in the winter from bucks county kawi, and it never came with a gasket on one drain plug, i figured it wasnt a big deal it screws in deep so it will seal. so first i get a milk shake, and when i get the ski back from the dealer within 10 mins it is still getting water in it. i never even thought to check if it was taking on water, on a brand new ski. so i finally got a gasket, and the leak stopped. so basically bad prep work caused my ski to get a milkshake and a rusty sc pulley.


  2. #2
    nicjak's Avatar
    Join Date
    Mar 2008
    Location
    Warragul, Downunder
    Posts
    7,794
    +1
    625
    fail to see how the water caused a milkshake inside your motor unless you nearly sunk it.

  3. #3

    Join Date
    May 2009
    Location
    nyc
    Posts
    684
    +1
    7
    water inside the hull, wouldnt it get sucked into the motor? and no never nearly sunk it.

  4. #4
    nicjak's Avatar
    Join Date
    Mar 2008
    Location
    Warragul, Downunder
    Posts
    7,794
    +1
    625
    the intake is possibly one-two feet from the bottom of the hull and positioned up the front, hey your call glad you found the problem good luck

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Best way to find the source of an oil leak on 1200GP
    By herefishyfishy in forum Yamaha PWC Performance (2-stroke)
    Replies: 11
    Last Post: 12-01-2014, 12:58 AM
  2. Replies: 2
    Last Post: 08-16-2014, 11:04 AM
  3. Toying with the idea of selling my 1390 for a 4 stroke....thoughts?
    By cmgww in forum Yamaha PWC Performance (2-stroke)
    Replies: 12
    Last Post: 06-09-2014, 09:36 AM
  4. FS Getting rid of all my polaris parts!! Lots of good stuff
    By friscoboater in forum Polaris Classifieds
    Replies: 32
    Last Post: 07-16-2011, 05:37 PM
  5. Finisch all my problem
    By samui in forum 4-Tec Performance
    Replies: 2
    Last Post: 03-06-2011, 03:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •