Thread: E.c.u re'mapping who does it?
09-20-2010, 10:32 PM #1
E.c.u re'mapping who does it?
I have a 2002 F-12X hull that i modfied with an 08 ride plate and intake grate and narrowed the pump tunnel lot's and lot's of fiberglass work no paint all gelcoat! over 1500 hr's. As for the motor it is a 2005 F-12X that is stock no mod's the exhaust is modfied with 3 inch stainless steel tubing and 2 1/2 and is loud as Hell!!! As for the prop it is a SOLAS 18/30 but my rpm are down to 5900 to 6000!! I want to rebuild the motor this winter for more power with bigger cam's and re'mapping the E.C.U so who has the cam's and re'mapping?
09-21-2010, 05:25 AM #2
nitroshark on this forum. Otherwise you could try vipec out of oz, or see if you can make a power commander work...it's all honda.
09-21-2010, 07:00 AM #3
Shawn [Nitro] or Aurice [Promod] can help you with what is your next step. Both have been working on larger turbos and stand alone ECUs.
The Honda ECUs can not be externally remapped and the limiter is set around 6400.
09-21-2010, 11:59 AM #4
09-21-2010, 06:43 PM #5
Thank's guy's for all input! Nitro just email me with some price's. I will post some pic's and video of the work that i did soon!
09-21-2010, 08:25 PM #6
09-22-2010, 04:44 PM #7
I generally don't recommend going too crazy on a 12x. To go beyond our stage 2 level of performance the $ to hp ratio goes obsurd. But we have some obsurd customers.
Before you go crazy, check us out.
01-01-2011, 12:54 PM #8
01-01-2011, 02:00 PM #9
01-01-2011, 02:16 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By JFizzleJR in forum 4-Tec PerformanceReplies: 10Last Post: 06-18-2008, 03:27 PM
By Green Hulk in forum 4-Tec PerformanceReplies: 2Last Post: 10-28-2006, 01:15 PM
By ABBOTT in forum Yamaha How To & FAQsReplies: 2Last Post: 03-21-2006, 10:36 PM