Results 1 to 5 of 5
  1. #1

    polaris virage tx, after running wont restart

    Hi, starting new thread inhope of generating new ideas. 2001 virage tx came with 1200 motor but I put 1050 motor in. Robbed stator off 1200 and put on 1050. Runs well until it is shut off. Once it is warmed up, and shut off it wont restart. Pull yanyard and it cranks fine. Replaced 504 module two times with new module. Did not fix problem. If it is cold you can shut it off and then restart no problem. Can run five minutes and it will restart. Run thirty minutes and it wont restart until it sets for 2-3 hours then it will restart. If you jump the terminals on the solenoid it cranks good but will not fire. As long as you don't shut if off it will run all day. This problem is driving me nuts. Any ideas any one???????????


  2. #2
    Rasta Mon Condoms We Be Jammin!!!!! TxVirageTx's Avatar
    Join Date
    Aug 2006
    Posts
    5,775
    +1
    400
    theres a service bulletin about moving the red/purple cdi wire to another terminal.the cdi already thinks its running when its warmed up.

  3. #3
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,584
    +1
    1,272
    Quote Originally Posted by TxPro1200 View Post
    there's a service bulletin about moving the red/purple cdi wire to another terminal.

    the cdi already thinks its running when its warmed up.
    It does sound like you need to implement Service Bulletin PWC-00-05.

    Details can be found in my signature links, for red domestic engine.

  4. #4

    service bulletin

    Ok, tryed going thru the threads to try the service bulletin, even searched domestic red engine, couldn't find anything, so the red purple wire in the cdi is not supposed to be with the other red purple wires? The bulletin rec hooking it up to what wire? Left me hanging there.

  5. #5
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,584
    +1
    1,272
    Quote Originally Posted by dockeffer View Post
    ...going thru the threads to try the service bulletin, even searched domestic red engine, couldn't find anything...
    Not sure where you have been looking. Try here;

    How to do Service Bulletin PWC-00-05 (CDI Red/Purple to Orange) Fix no-warm-restart

    Polaris Domestic (red) engine

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2003 polaris virage, died while riding & wont restart
    By burke in forum Polaris PWC Performance
    Replies: 5
    Last Post: 03-30-2017, 10:02 AM
  2. 01 polaris virage tx start/running issue
    By Ethorn12 in forum Polaris Tech Tips and Info
    Replies: 3
    Last Post: 07-23-2016, 04:38 PM
  3. 2001 polaris virage tx, wont start again after shutting off.
    By dockeffer in forum Polaris Open Discussion
    Replies: 8
    Last Post: 07-12-2016, 05:12 PM
  4. 2001 polaris virage tx running poor!!
    By gary s in forum Polaris Open Discussion
    Replies: 6
    Last Post: 05-10-2011, 08:32 PM
  5. FS Non-running 2000 Polaris Virage TX ( Houston, TX )
    By thehemi in forum Polaris Classifieds
    Replies: 19
    Last Post: 04-23-2011, 03:35 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •