Thread: 1100 intake manifold question
10-01-2010, 05:01 PM #1
1100 intake manifold question
Is the bolt patern on the 1100 intake as the same as the 1200 kawi motor? Have a friend building a 1100 sxr and needs an intake that will accept the mikuni sbn carb.
10-01-2010, 11:56 PM #2
I don't see an 1100 SXR in the parts lookup. However, comparing an Ultra 150 to an 1100 STX, the part numbers are different.
10-02-2010, 11:46 AM #3
He is building an open boat for racing next season. There is a lot of people building these now. 60+ MPH sxr's will be all over the place at WF this year. I know the distance between the reeds are different, just need to know if the bolt pattern for the reeds are the same or different. The Mikuni R&D instakes for the 1100 motors are disconntinued and are like gold if you have one. Anyone have one of those they want to part with?
10-02-2010, 12:37 PM #4
evolution marine use to make a sick side draft setup so the carbs would sit like the 1200 does there was recently a set up on ebay but im its long gone by now. ur best bet is to call around to some kawi specific speed shops might come across something just layiinon the shelf idk if evolution marine is still in business if so call there
10-02-2010, 04:13 PM #5
I could be wrong, but I think the reed gaskets have the same pattern? Maybe you friend might be best just ordering one from a 1200 and one from an 1100 and having a look at them (that would be the cheap way of finding out).
As for Manifolds. Most CNC or laser cutting place would be able to make a manifold. They are not overly complicated (the ones for the 1200 I mean).
10-04-2010, 07:16 AM #6
I see that Rouge is selling side draft intakes that look just like the GroupK intakes for the 1200 like I have. His tuner is trying to stay away from side draft and the R&D is impossible to find these days.
10-04-2010, 08:45 AM #7
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By evil4g63 in forum 2-Stroke PerformanceReplies: 4Last Post: 06-20-2008, 05:32 PM
By 1BAD07RXP in forum 4-Tec PerformanceReplies: 43Last Post: 06-16-2008, 02:10 PM
By miamirider in forum 4-Tec PerformanceReplies: 32Last Post: 03-04-2008, 09:24 AM
By US PERFORMANCE in forum 4-Tec PerformanceReplies: 0Last Post: 05-23-2007, 09:12 AM
By bluedlude in forum 4-Tec PerformanceReplies: 6Last Post: 04-02-2007, 06:09 PM