10-02-2010, 08:24 AM #1
I wonder if this will be any good on my sho???
guys ive been playing around with this for the last few weeks ive not had chance to test yet as ive got man flu
basically ive removed the rear nozzle from my ski and fabricated another nozzle from a gp1300r ive also cut up and fabricated a steering nozzle from a gp1200
the result is as follows in comparison.
stock nozzle is 83mm but not true all the way round
gpr nozzle is 85mm and almost true it was in fact slightly over so i trued it to 85mm
the stock steering nozzle is 90mm and is not true, and only has roughly 2" of usable metal at that diameter wich prob wont make a difference but thaught i would mention all the differences
the gp1200 steering nozzle is 92mm and has usable metal at 92mm the whole way down the barrel it was trued.also it is slightly longer than the original even though ive had to cut it down to make it fit behind the reverse bucket.
i will be testing this week and will note all the changes it makes to the ski.
10-03-2010, 04:14 AM #2
Ive started doing this to a spare 85mm nozzle as well-was just about to order a gpr steering nozzle, but 'll hang fire and wait for your results now!
Would like to know effect on rpm's please as well?
10-03-2010, 04:19 AM #3
might get it tested today if it stops fookin raining
10-03-2010, 04:50 AM #4
10-03-2010, 06:13 AM #5
ok the mrs wont let me out
,ok im going now!!!
10-03-2010, 06:19 AM #6
[QUOTE=corkycat;1564808]ok the mrs wont let me out
Dear Mrs corky
please can mark go out to play ?
he has a few things to test on his ski,
plus if he goes out today to play he will do all the chores over the next week and
will have your tea on the table in the foreseeable future,
plus he must be getting under your feet at home and mopeing around
10-03-2010, 06:26 AM #7
haha paul she said DEAL. cheers pal she has the pen and paper out now!!!
im going to test it in half hr
10-03-2010, 09:55 AM #8
10-03-2010, 09:58 AM #9
sorry to bother you again but can you please give Mark some time off in the week so he can double check and jobs he may of done around the house in the past for you..
It would seem he is getting forgetful when working on his ski and did not torque his prop up for testing this morning so he needs time to check and double check his jobs so this does not happen again.....see pic
10-03-2010, 01:14 PM #10
hahaha my bad, the morrel of this is check check and check again i usually do and better check but ive been ill the last few days and must have been weeker than i thaught...... results coming shortly
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By mjh3ides in forum Yamaha PWC Performance (4-stroke)Replies: 1Last Post: 06-30-2008, 07:42 PM
By HaigUltra76 in forum Yamaha PWC Performance (4-stroke)Replies: 25Last Post: 04-08-2008, 06:19 PM
By sho me the money in forum Yamaha Open DiscussionReplies: 3Last Post: 11-19-2007, 07:41 PM
By sbarnette in forum Yamaha Open DiscussionReplies: 1Last Post: 09-13-2007, 12:22 PM
By peteshauling in forum Open DiscussionReplies: 9Last Post: 06-13-2006, 12:33 AM