Results 1 to 4 of 4
  1. #1

    Torque specs for the bolts for the cases

    The ones that bolt the 2 halves together from underneath? let me know. Also after a rebuild is it recommended to prime oil into the engine or lube/grease the engine prior to starting up the ski?
    Thanks in advance.


  2. #2
    THE PLATE MAN JIM'S PERFORMANCE's Avatar
    Join Date
    Nov 2005
    Posts
    6,194
    +1
    536
    Quote Originally Posted by GPR Ace View Post
    The ones that bolt the 2 halves together from underneath? let me know. Also after a rebuild is it recommended to prime oil into the engine or lube/grease the engine prior to starting up the ski?
    Thanks in advance.
    inners 1st step 11 ft lb
    2nd step 20 ft lb

    outter 8 ft lb

    And yes add a little 2 stoke oil in the crank case so everything stays lubed.

  3. #3
    L Carlson's Avatar
    Join Date
    Aug 2007
    Location
    Bonita Springs, Florida, United States
    Posts
    7,118
    +1
    2
    Quote Originally Posted by JIM'S PERFORMANCE View Post
    inners 1st step 11 ft lb
    2nd step 20 ft lb

    outter 8 ft lb

    And yes add a little 2 stoke oil in the crank case so everything stays lubed.
    And make sure you seal the cases before you put the top and bottom halves together

  4. #4
    agsbill's Avatar
    Join Date
    Jun 2010
    Location
    Gainesville, Ga.. Lake Lanier ....... 2006 FXHO Cruiser
    Posts
    270
    Quote Originally Posted by GPR Ace View Post
    The ones that bolt the 2 halves together from underneath? let me know. Also after a rebuild is it recommended to prime oil into the engine or lube/grease the engine prior to starting up the ski?
    Thanks in advance.
    Have you read this post in "The How To" section?

    http://www.greenhulk.net/forums/show...tructions-(PDF)

    Bill

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Torque specs for the 4 Main bolts that hold the aluminum jet pump.
    By JeffStalone in forum Sea Doo Open Discussion
    Replies: 6
    Last Post: 09-17-2015, 12:11 AM
  2. Replies: 1
    Last Post: 02-18-2014, 01:01 PM
  3. Torque specs for 99 GP1200, how to flush the motor and Steering Nozzle
    By Wayne9499 in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 07-10-2012, 02:41 PM
  4. I need the torque specs for a 2000 Kawasaki 900 STX
    By jdt1003 in forum Kawasaki Projects
    Replies: 0
    Last Post: 06-08-2012, 04:07 PM
  5. In Need of Torque spec for the 650
    By freemandino25 in forum Polaris Open Discussion
    Replies: 2
    Last Post: 08-17-2011, 07:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •