Results 1 to 3 of 3
  1. #1

    Can someone measure a domestic exhaust bolt for me?

    I don't have any of the support bolts installed on the pipes on my domestic triples. After finding a cracked pipe on the SLTX, I need to get these bolts installed.

    I found some that fit on the '96 manifolds, but it looks like they changed the thread size in '97 and later models. I can't find anything in my stash of spare fasteners.

    If someone happens to have one of these laying around, can you try to measure the diameter and length?

    Looking for #9 in this diagram:
    Click image for larger version. 

Name:	pw01slxexhaustsystem.gif 
Views:	56 
Size:	11.7 KB 
ID:	217182

  2. #2
    casey67's Avatar
    Join Date
    Sep 2006
    All I can find is that it is a 12mm. I do know that on the 700's they are the same bolt as the rear top pipe bolt,I seem to remember the 3 cyl are shorter.

    Are you sure the threads are in good shape ? My guess is all the pipe bolts are the same thread.

  3. #3
    Both bolts are the same size and length, but there appears to be a difference in diamter in the newer models vs. the older ones.

    I managed to find a couple bolts that fit on the '96 SLTX and the '96 SL900 but they are too small for the 1200. They slide right through on both holes and don't engage the threads at all. I may need to just go pick up an assortment and figure out which fits.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Polaris Exhaust (Domestic & Fuji)
    By CrazyA in forum Polaris Tech Tips and Info
    Replies: 1
    Last Post: 12-28-2011, 04:59 AM
  2. Broke Exhaust Manifold bolt off in cylinder
    By mboley in forum Polaris Open Discussion
    Replies: 6
    Last Post: 03-13-2007, 11:10 PM
  3. grab a tape measure and measure something for me?
    By Shibby1485 in forum 4-Tec Performance
    Replies: 17
    Last Post: 11-26-2006, 01:03 AM
  4. T-Bolt Rubber Exhaust
    By Kinchyle in forum 4-Tec Performance
    Replies: 1
    Last Post: 03-17-2006, 11:30 AM
  5. Who wants to measure the RIVA IC?
    By Shibby1485 in forum 4-Tec Performance
    Replies: 20
    Last Post: 02-04-2006, 12:18 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts