Page 1 of 5 1 2 3 ... LastLast
Results 1 to 10 of 45
  1. #1
    WBoulton's Avatar
    Join Date
    Mar 2010
    Location
    doylestown PA, sea isle city, nj
    Posts
    569
    +1
    1

    ET 127 : 215 Dropin wheel 3mm spacer Billet impeller?????

    has anyone run this set up yet?? how does it compare to a stock X charger? I'm looking to do some up grades over the winter and maybe get into the high 70s mph.


  2. #2
    mrbtd's Avatar
    Join Date
    Jul 2005
    Location
    Lindenhurst, Illinois, United States
    Posts
    4,309
    +1
    2
    IMO it only makes sense on a newer 08 charger.

    By the time you buy the wheel and an 08 update kit (any charger with 100+ hours needs it) you are better off with an X-Charger.

  3. #3
    BAYOU FZR's Avatar
    Join Date
    Mar 2009
    Location
    Thibodaux L.A.
    Posts
    792
    +1
    31
    Quote Originally Posted by mrbtd View Post
    IMO it only makes sense on a newer 08 charger.

    By the time you buy the wheel and an 08 update kit (any charger with 100+ hours needs it) you are better off with an X-Charger.
    +1

  4. #4
    b_dolla44's Avatar
    Join Date
    Apr 2008
    Location
    Noblesville, Indiana United States
    Posts
    1,165
    +1
    15
    Quote Originally Posted by mrbtd View Post
    IMO it only makes sense on a newer 08 charger.

    By the time you buy the wheel and an 08 update kit (any charger with 100+ hours needs it) you are better off with an X-Charger.
    X3... not to sure about how the two compare but i know you will be more than satisfied with a x charger... plus it will take you well past the high 70's...

  5. #5
    WBoulton's Avatar
    Join Date
    Mar 2010
    Location
    doylestown PA, sea isle city, nj
    Posts
    569
    +1
    1
    My charger was rebuild 10 hours ago so I was told. I was told by the previous owner it was done at 60 hours along with a washer upgrade. I've got 70 hours on it now, but at the same time who knows if he was telling the truth. can I just bolt the 08 X charger on?

  6. #6
    b_dolla44's Avatar
    Join Date
    Apr 2008
    Location
    Noblesville, Indiana United States
    Posts
    1,165
    +1
    15
    depending on your current level of mods... if the ski is 100% stock with stock intake,then yes... According to jerry "greenhulk" i have not personally checked A/F's if you still have the internal Intercooler and stock ECU then you will need a set of 42lb injectors to go with the x charger. and if you have a external IC you will need 42lb inj + rrfpr....

  7. #7
    WBoulton's Avatar
    Join Date
    Mar 2010
    Location
    doylestown PA, sea isle city, nj
    Posts
    569
    +1
    1
    yeah I knew that part. I know the 08 blowers are a little different and wasn't sure if they bolt right on.

  8. #8
    b_dolla44's Avatar
    Join Date
    Apr 2008
    Location
    Noblesville, Indiana United States
    Posts
    1,165
    +1
    15
    yes, they bolt right up...

  9. #9
    BAYOU FZR's Avatar
    Join Date
    Mar 2009
    Location
    Thibodaux L.A.
    Posts
    792
    +1
    31
    Quote Originally Posted by b_dolla44 View Post
    depending on your current level of mods... if the ski is 100% stock with stock intake,then yes... According to jerry "greenhulk" i have not personally checked A/F's if you still have the internal Intercooler and stock ECU then you will need a set of 42lb injectors to go with the x charger. and if you have a external IC you will need 42lb inj + rrfpr....
    I run the x charger with stock IC and the stock injectors with the rrfpr ski runs in the 77's all day

    Ski runs great! Thanks Jerry!

  10. #10
    b_dolla44's Avatar
    Join Date
    Apr 2008
    Location
    Noblesville, Indiana United States
    Posts
    1,165
    +1
    15
    Quote Originally Posted by BAYOU RXP View Post
    I run the x charger with stock IC and the stock injectors with the rrfpr ski runs in the 77's all day

    Ski runs great! Thanks Jerry!
    nice! whats your base fuel pressure set at? and do you have the boost line hocked up? What do your A/F's look like?

Page 1 of 5 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS - Parts black et 137 wheel and 3mm spacer
    By 98gsxl951 in forum Sea Doo Classifieds
    Replies: 4
    Last Post: 04-09-2013, 08:05 AM
  2. FS 08 charger with FRESH REBUILD... with ET 127 wheel and 3mm spacer
    By greenbullet in forum Sea Doo Classifieds
    Replies: 2
    Last Post: 10-06-2011, 12:48 AM
  3. FS: X charger,injectors,engine tech 137-x wheel & 3mm spacer.
    By brendus in forum Sea Doo Classifieds
    Replies: 2
    Last Post: 03-10-2009, 09:01 AM
  4. F.S Brand New ET 137 Wheel With 3mm Spacer!!!
    By beachbum0286 in forum Sea Doo Classifieds
    Replies: 6
    Last Post: 12-14-2008, 09:11 AM
  5. FS ET 137mm wheel & 3mm Spacer for X-Charger
    By jk in forum Sea Doo Classifieds
    Replies: 1
    Last Post: 09-04-2008, 01:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •