Thread: Add VTS to RXT
10-27-2010, 09:37 AM #1
Add VTS to RXT
What's invoked with putting Vts on a T? Can Theron harness be modded or does it require a new one ?
10-27-2010, 10:57 AM #2
- Join Date
- Nov 2007
wouldnt it be easier and cheaper to install one of the old manual type we used on race boats in the 90s>Marvin
10-27-2010, 11:19 AM #3
I have VTS on my 05 RXT.
It has 08 T-X ecu and gauge not sure what MPEM is has.
I believe cheesy wired it up, harness and all, for the ski.
Maybe water4fire will chime in on what is actually needed to make the conversion.
Gus, i believe, put VTS on his also.
10-27-2010, 04:11 PM #4
Duke you have to mod the stock wire harness or install a harness with VTS. That now a days is easier than moding the existing harness as most people give RXP or T-x harnesses away cheap.
Yes, I paid Cheezy to mod my harness He added it just as if it was OEM.
You need to take a Stock VTS rod and shorten it then drill and tap it for it to be connected back togethere with a screw with its head cut off. I used epoxy when I screwed it togethere and it is set solid. This is required as the stock RXT pump shoe is slightly different than a t-x requiring the shorter rod or replace Shoe with a T-x shoe.
Ofcoarse the steering harness needs to be the vts type harness. Hope this helps.
10-27-2010, 07:10 PM #5
10-28-2010, 06:50 AM #6
10-28-2010, 07:24 AM #7
Duke... Cheezy did the whole install for me and yes the harness needed to be modified the rod shortened as well. I just bought all the OEM parts needed except for the harness. You also have to connect to BUDS to get it to recognize the VTS. I'm very satisfied with the setup and now I have a better hole shot.
10-28-2010, 12:09 PM #8
It's for my new 08 connexion. All I have is the 07 RXT harness.
I put VTS on Carries conversion and really like it. Already had a 08 RXP harness in it.
Maybe I'll put a want to trade plus $ in the cassifieds. Has to be a lot of conversions out there running P harnesses amd not utilizing the VTS.
Doel, can you get a hold of chezzy and see if he would trade something or mod mine?
10-28-2010, 01:31 PM #9
10-28-2010, 03:29 PM #10
- Join Date
- May 2008
If anyone doing this conversion needs a complete vts motor and housing let me know i have one from a 06 rxp. p/m me
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By lawracing in forum 4-Tec PerformanceReplies: 10Last Post: 07-24-2008, 10:34 PM
By agibbs in forum 4-Tec PerformanceReplies: 11Last Post: 01-08-2008, 08:53 PM
By Antiguan FZR in forum 4-Tec PerformanceReplies: 1Last Post: 09-28-2007, 11:59 AM
By MoTeC_Master in forum 4-Tec PerformanceReplies: 3Last Post: 08-19-2007, 03:18 AM
By ActionR32 in forum 4-Tec PerformanceReplies: 4Last Post: 07-04-2005, 06:16 PM