10-31-2010, 04:07 PM #1
How in the F**K do the bottom two bolts on the intake manifold come off...I can't even get an open end wrench on them because of the angle.....tips and tricks are much appreciated......thanks Damon
10-31-2010, 04:12 PM #2
10-31-2010, 04:13 PM #3
10-31-2010, 06:17 PM #4
yeah that sucked.....the two bolts under the intake manifold that go through the rubber compression thingamajigs were rusted and wouldn't budge....finally I just had to pull super hard on the manifold and it finally popped off.....oh well....
10-31-2010, 06:31 PM #5
You don't have to take those off. Just take the manifold bolts on the top side and pull manifold off cylinder head and lift off. Those bolts with the rubber dounuts stay on the block.
10-31-2010, 06:41 PM #6
yeah... I left them there....it just took some serious pulling to get the mani off....I was worried about breaking something....once I got it off I saw that it just pops on there.....heh now I know.....thanks for the heads up
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)