Page 1 of 2 1 2 LastLast
Results 1 to 10 of 19
  1. #1

    Hey guys new to forum

    Hey guys new to the forum first thank you Jerry and Steve (Shibby1485) for all of your help. Just added some new mods to my ski and thought I would share my results set-up before was riva stage one with riva intercooler, riva thru hull exhaust, and pro blockoffs previous best speed was 72.6 MPH. I recently added rr ecu, rr impeller, riva valve train upgrade, and 15-20 impeller -2mm (Jerry) results were 77.4 at 8550RPM. I was reading through this forum and saw that a lot of you were receiving good results with filling ride plate holes and trimming reverse bucket just finished doing mine and was very impressed gained 1.4 MPH and ran a constant 78+ with a best of 78.8 at same RPM. Air temp was 78 water 75


  2. #2
    Dont judge me...
    Join Date
    Jul 2006
    Location
    FLORIDA
    Posts
    610
    welcome and congrat......

  3. #3
    BOOSTED's Avatar
    Join Date
    Oct 2006
    Location
    ARUBA
    Posts
    359
    Welcome, i can see you are already hooked up

  4. #4
    V-Tec, 4-Tech that's how I roll meirvin's Avatar
    Join Date
    Feb 2006
    Location
    Dallas/Ft Worth, Tx
    Posts
    1,514
    +1
    3
    Welcome..Nice Numbers

  5. #5
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524

    Excellent results. Glad you finally decided to join us

  6. #6
    Moderator RX951's Avatar
    Join Date
    Apr 2005
    Location
    League City, Texas
    Posts
    16,066
    +1
    23
    Welcome to the Forum surfer !

  7. #7
    Thanks for the welcome do have a couple of questions getting so close to 80 I am now determined was looking at a few different upgrades installing the aluminum piping for intercooler, metal wear ring, 15-19 3 blade impeller, and maybe riva rear intake when it is released I also saw a lot of you were removing your impeller cone and seeing gains I ride a lot in salt water and wasn’t sure about the added corrosion this might add? any saltwater riders doing this? Any feedback on these upgrades would be very helpful by the way riding a 05 RXP.

  8. #8
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524
    The mandrel bent aluminum IC plumbing is a must. Much less chance of having a boost leak.

    The Riva rear air intake will be a nice addition to your setup. I am taking pre orders for these now so you may want to get your name on the list by placing your order. (your cc will not be billed until it ships)
    http://www.4-tecperformance.com/inde...roducts_id=447

    I recently started using the new 15/19 3 blade and cant say enough about it. It's awesome!!!

    No worries about corrosion when running with a nose cone. Salt water gets in there even with a nose cone anyway
    Last edited by Green Hulk; 11-03-2006 at 10:42 AM.

  9. #9
    THE OFFICAL SUPERDUTY!!!!!! superduty's Avatar
    Join Date
    May 2006
    Location
    Webster, Texas
    Posts
    4,726
    +1
    5
    welcome to the forum

  10. #10
    Welcome to the board Dude! ...PR...

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Did I smoke my motor? Oh yea, Hi guys new to the forum.
    By 800n in forum Yamaha PWC Performance (2-stroke)
    Replies: 19
    Last Post: 04-29-2013, 12:39 PM
  2. Hey guys, new to the forum and have a question
    By GPRhollic in forum Yamaha PWC Performance (2-stroke)
    Replies: 8
    Last Post: 02-15-2011, 07:50 AM
  3. hey guys new to the forum
    By gtxforlife88 in forum 4-Tec Performance
    Replies: 2
    Last Post: 06-18-2010, 10:22 PM
  4. New guy but not new to forums...need crank assistance
    By Stagesrt4 in forum 2-Stroke Performance
    Replies: 17
    Last Post: 03-18-2010, 09:33 PM
  5. Hey everyone new to forum with some ?'s on 04 gtxsc
    By mooneyb91084 in forum 4-Tec Performance
    Replies: 16
    Last Post: 03-08-2007, 05:47 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •