Results 1 to 7 of 7
  1. #1

    Join Date
    Sep 2006
    Location
    San Juan, Puerto Rico, Puerto Rico
    Posts
    127

    water of the pipe to waterbox

    Last edited by freddypr1; 11-02-2006 at 10:12 PM.


  2. #2

    Join Date
    Sep 2006
    Location
    San Juan, Puerto Rico, Puerto Rico
    Posts
    127

    water of the pipe to waterbox

    I can improve the unloading of the water of the pipe to waterbox in my MSX 140 I believe that he is many of water the one that enters the Waterbox,
    Attached Files Attached Files

  3. #3
    ph2ocraft's Avatar
    Join Date
    Apr 2006
    Location
    Campbell, Ca.
    Posts
    14,100
    +1
    105
    Freddy, what are you trying to do? If you're looking for some more speed, why don't you do a couple of simple mods?

    Raise the cylinders with the .040 gaskets or install two of them
    Run a 6 degree wedge
    Run an 04 ride plate which has more kick to it

  4. #4

    Join Date
    Sep 2006
    Location
    San Juan, Puerto Rico, Puerto Rico
    Posts
    127
    Ph2ocraft you say to me that meeting,040 installs 2 to him between crankcase and the cylinder in the area where is seen in the drawing, where I can obtain to the 04 ride plate which you have dwells kick to it
    Attached Images Attached Images

  5. #5
    ph2ocraft's Avatar
    Join Date
    Apr 2006
    Location
    Campbell, Ca.
    Posts
    14,100
    +1
    105
    Quote Originally Posted by freddypr1 View Post
    Ph2ocraft you say to me that meeting,040 installs 2 to him between crankcase and the cylinder in the area where is seen in the drawing, where I can obtain to the 04 ride plate which you have dwells kick to it
    I meant get a .040 gasket or 2 of the .020 gaskets. Randy at Watcon has them and ships out of the US. I know Jay at Atlantic Powersports also carries the gaskets but I'm not sure that he ships out of Country, I'll have to check on Tuesday.
    The 04 ride plate has roughly 4mm more kick than the 03 ride plate so you can mod it yourself, otherwise I think only your Polaris dealer can get it.

  6. #6

    Join Date
    Sep 2006
    Location
    San Juan, Puerto Rico, Puerto Rico
    Posts
    127
    then I understand that it joins to him goes where one sees in the drawing so that the cylinder raises with 2 meetings of,040 that go to raise,080 or 2,040 meetings of,020 which any form goes to raise that makes the best thing serious to increase the speed, another thing installs an magnum pump 8 vane skat trak and very good exit but I have rpm 6500 maximum I have original impeller already probe nujet 7,0 but work as it hoped I do not believe that I need but horsepowers

  7. #7
    ph2ocraft's Avatar
    Join Date
    Apr 2006
    Location
    Campbell, Ca.
    Posts
    14,100
    +1
    105
    No more than .040 total use
    1 .040 gasket
    or
    2 .020 gaskets

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS The pics of the pipes.............
    By peteshauling in forum Yamaha Classifieds
    Replies: 1
    Last Post: 08-22-2010, 06:56 AM
  2. Empty water out of the pipes?
    By krispaintballz in forum Yamaha Old School Skis
    Replies: 3
    Last Post: 09-04-2008, 07:15 PM
  3. Water in the oil after waterbox mod!!
    By BHolley in forum 4-Tec Performance
    Replies: 6
    Last Post: 04-29-2007, 08:55 AM
  4. J-pipe to waterbox connection quest...
    By Pale Rider in forum Sea Doo Open Discussion
    Replies: 6
    Last Post: 09-17-2006, 07:52 AM
  5. Return of the XPDI to the SD Line up
    By ActionR32 in forum Sea Doo Open Discussion
    Replies: 9
    Last Post: 10-16-2005, 07:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •