Thread: 00 gpr hull+ parts
12-01-2010, 12:02 AM #1
00 gpr hull+ parts
Been away a while now back to annoy all my hulk family members
Have a 00 gpr i want to part asap. I have no paper or reg.
everything is clean.
has everything minus motor/exhaust. Fairing are clean seat is m-line.
Has hydro-turf. Not sure on gauge hours but will power it up to see.
Please let me know what parts you would need. Seems to be 100% stock. carbs are there but in a plastic bin in parts. All reasonable offers accepted.
Also starting to pull out parts from my storage! Will add as I pull them out
"KEEP IN MIND I HAVE 6 XLTS 2005 1200'S All will be parted All not running
Carbs dismantled and in plastic container 2000 GPR $100+ship
Set of carbs of 05 freshwater ski. I rebuil these for my superstock triple piper. Removed acc pump ,choke plates and linkage. Installed T handles highs and lows. Price includeds flame arrestor adapters. Its jetted 160 highs and 120 lows i believe I will double check. Never ran after rebuild. I bought the Navi's $300.00 + ship
Another set of carbs off a running 2002 GPR . I cleaned the loose paint off when I rebuil back in 08. all stock $200.00+ship
Two external mikuni fuel pumps along with a water seperator $70+ship
05 66v cylinder scoured. For core only $25+ship
2002 shaft/pump/wear ring/exit and steering nozzle along with oem prop and reverse gate
2 T/W 66v cranks. Not 100% on hrs. $100.00 each + ship
2005 xlt midshaft $75.00 +ship
GP1200/800/760 Riva ride plate $100 Shipped in US
GPR/XLT Flame arrestors Carbon Fiber. with adapters $150.00 shipped US
1 2003 gp1300r seat pan. Needs recover $25 +ship
1 2002 gp1200r seat pan with an ugly orange basket ball type $30+ship
Aluminum battery tray relocater for gpr Needs a repolish. I removed it from my conversion hull. $40.00+ship
2005 66v motor 125 hrs on bottom. New pro x top end 0 hrs . Has oem reeds stator plate and startor.Has wave eater clips and couplers installed already. Has oil pump block off plate MAKE OFFER
2005 66v bottom end . Both case nice shape. T/W crank around 80hrs. I installed new seals. I believe some sealant sqeesed in bewtween crank and case. spins nice but feel tighter in one spot. I would recomend resealing it . ALSO MAKE OFFER
1999 XL 1200 hull. Has seat, Fairings and water box. Hull is clean seats faded. Have Papers!!! $300.00 picked up unless other arrangments.
Have clean 2000 gpr silver fairings and clove box $ 125+ship
Brand new never even out of box. Solas YD 13/20 set back concord prop. Has prop tool and cone. What ever the sell for new I"ll take $50.00 OFF original price + you pay ship
I have promised the clean cylinders to Christian79 as I start dismantling the xlt's at least 3. I will have a ton of cores though as well.
"PM ME YOUR BEST OFFERS LADY AND GENTS" Im up to 16 ski's and they all have to go
Last edited by GPRFrank; 12-04-2010 at 12:45 AM. Reason: Pics and more parts
12-01-2010, 12:12 AM #2
Interested in the cluster pending hours and a PM from frank on cost to 43040
12-01-2010, 11:32 AM #3
- Join Date
- Sep 2009
- San Diego, California, United States
Maybe someone is itching to do a GPRXP conversion???
12-01-2010, 12:41 PM #4
12-02-2010, 09:22 PM #5
12-02-2010, 11:36 PM #6
Free bump for Frank.... Thanks again for the cluster
12-02-2010, 11:39 PM #7
12-04-2010, 12:52 AM #8
More pics. Have few more comming up
12-04-2010, 12:57 AM #9
12-04-2010, 08:43 AM #10
Dibs on 2 T/W 66v cranks. Not 100% on hrs. $100.00 each + ship pending estimate on hours.
Dibs on 2005 xlt midshaft $75.00 +ship plus a few more when you get them off.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Al/gsx/sj in forum Sea Doo ClassifiedsReplies: 12Last Post: 08-14-2008, 05:01 PM
By chrisd in forum Yamaha ClassifiedsReplies: 5Last Post: 08-05-2008, 11:08 AM
By crashhard in forum Yamaha ClassifiedsReplies: 4Last Post: 07-02-2008, 09:19 AM
By Balance_Fighter in forum Sea Doo ClassifiedsReplies: 9Last Post: 05-11-2008, 06:55 AM
By rgard32 in forum Polaris PWC PerformanceReplies: 27Last Post: 01-29-2007, 01:09 AM