Thread: RXTx 260 prop off
12-15-2010, 04:52 AM #1
- Join Date
- Jun 2007
- Abu Dhabi , United Arab Emirtaes
RXTx 260 prop off
Last weekend we faced problem with my TX260 after i installed solas prop. After 15 to 20 mints of operation i faced a problem some water was entering inside the hull, after taking out the air filter out and the supercharger pipes i found out that the water entering the hull from the shaft area although my cuz and i tried to screw back the clamps but no use. we just wanna save the watercraft from drowning. After opening the pump we found out that the prop is loss, also the shaft thread is damaged and the plastic area is damaged from the prop. i don't know what caused the prop to get loss and make this disaster this is not my first time to change prop of PWC.
12-15-2010, 06:46 AM #2
It sounds like you didn't torque it hard enough. I have had mine come loose to, and it caused the same problem.
Torque it HARD
You can get a new shaft and wear-ring from Jerrys online store
12-15-2010, 10:20 AM #3
- Join Date
- Jun 2005
- rome ga
did you put an old style prop on new style pump?
12-15-2010, 10:24 AM #4
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By polaris 750SL in forum Polaris PWC PerformanceReplies: 37Last Post: 03-16-2010, 07:12 PM
By ShaunJon in forum Yamaha ClassifiedsReplies: 3Last Post: 06-15-2008, 07:33 PM
By The Blue Demon in forum 4-Tec PerformanceReplies: 6Last Post: 06-13-2008, 04:52 PM
By The Blue Demon in forum Sea Doo Open DiscussionReplies: 0Last Post: 06-13-2008, 02:31 PM
By SideFX in forum Sea Doo Open DiscussionReplies: 1Last Post: 05-04-2008, 07:03 PM