Results 1 to 5 of 5
  1. #1
    drewnz's Avatar
    Join Date
    Oct 2010
    Location
    Sydney
    Posts
    74

    GP1300R nozzle on FZR

    Hi.

    can any one confirm:
    FZR stock Exit Nozzle size=
    GP1300R Exit Nozzle Size=
    Will a GP1300R Exit Nozzle fit a FZR without any mods?

    Cheers


  2. #2
    Mongoose's Avatar
    Join Date
    Aug 2005
    Location
    Wales
    Posts
    665
    +1
    6
    GPR nozzles come in 2 stock sizes 85mm and 87mm.
    You will need the 85mm
    Direct bolt on fit. If you want the reverse bucket to work you will need to drill and tap the GPR nozzle ( the 4 posts are there already for you!)
    Quote Originally Posted by drewnz View Post
    Hi.

    can any one confirm:
    FZR stock Exit Nozzle size=
    GP1300R Exit Nozzle Size=
    Will a GP1300R Exit Nozzle fit a FZR without any mods?

    Cheers

  3. #3

    Join Date
    Jul 2005
    Location
    Central North Carolina
    Posts
    3,846
    +1
    527
    OEM reduction nozzle for fzr/fzs size is 82.5 mm , Gpr oem reduction nozzles are 85mm or 87mm, Tommy Jordan

  4. #4
    Banned User
    Join Date
    May 2006
    Posts
    1,329
    +1
    152
    A person should not confuse the exit nozzle with the stering nozzle

  5. #5
    drewnz's Avatar
    Join Date
    Oct 2010
    Location
    Sydney
    Posts
    74
    Quote Originally Posted by 2fast4u View Post
    OEM reduction nozzle for fzr/fzs size is 82.5 mm , Gpr oem reduction nozzles are 85mm or 87mm, Tommy Jordan
    Cheers, Rocketman put me onto this idea - he's got great advice and experience on makin FZR's pull hard (so to speak) Ive noticed the R&D and Riva nozzels for FZR CC Racing are all around the 80.5 - 81.5 mm...Quite a bit smaller.
    I would have thought at these sizes the off the line and out of turns would have been restricted but top end would have been improved. Its all very interesting...I spoke to R&D this morning and they recommended a 12/20 impeller for CC racking...That sounds like a high reving beast to me!!! They reckon it pulls hard on a stock ski and you only loose 2-3 mph at the top. True?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Any issues with XLT nozzles breaking on FZR's?
    By RobZ71LM7 in forum Yamaha PWC Performance (4-stroke)
    Replies: 2
    Last Post: 11-24-2013, 08:57 PM
  2. 82mm nozzle on an FZR?
    By Yellow93 in forum Yamaha PWC Performance (4-stroke)
    Replies: 15
    Last Post: 06-02-2013, 08:43 PM
  3. Anbody try an 84mm pump nozzle on a Superjet?
    By LT1GMC in forum Yamaha Old School Skis
    Replies: 3
    Last Post: 07-31-2007, 05:52 AM
  4. Need picture of nozzle on stock RXT...
    By GeoRXT in forum Sea Doo Open Discussion
    Replies: 28
    Last Post: 05-18-2007, 09:21 AM
  5. R&D ride plate hitting on pump/nozzle on 03 1300 ??
    By slow1300 in forum Yamaha PWC Performance (2-stroke)
    Replies: 13
    Last Post: 05-28-2006, 11:39 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •