Thread: IC bracket pics
11-07-2006, 08:13 PM #1
IC bracket pics
A few members asked if I had any additional pictures showing my XSpower IC bracket. The first "installed" picture is not very good. The second is a repost of the entire set-up. The third is the bracket itself.
For more detailed information, see this post:
I hope this helps those who were interested,
11-07-2006, 08:19 PM #2
thanks for posting these jeff.
so the left (lower) side of the ic isn't bolted to nething?
11-07-2006, 08:20 PM #3
I take it you no longer have the resonator in your exhaust system. Or is it not the same as a RXT/RXP?
11-07-2006, 08:39 PM #4
The first few installs I only used the bracket you see here.... and the IC will not budge.
However, I was contemplating a complete package to sell and felt it prudent to build a lower mount for customer "peace of mind". Therefore, I did make a similar yet shorter version of this bracket. It attaches to the resonator bolt hole in the hull. It was a mutha' to reach the hardware . Sorry, but I don't have a picture of it. I may have an opportunity to get a pic, as one of those customer is bringing his ski back for more "stuff".
R-Doo... yes, you must remove the resonator to do THIS install, but you can use the stock exhaust tube. I think, though, that someone here has an XSpower install that will allow you to keep the resonator... can't remember who
Let me know if I can help,
Last edited by 05Limited; 11-07-2006 at 08:41 PM.
11-07-2006, 08:43 PM #5
if you do sell a package, or even the top bracket, i would be interested.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By mstang1988 in forum Open DiscussionReplies: 1Last Post: 09-02-2010, 01:03 PM
By WATER WOODY in forum Yamaha Open DiscussionReplies: 5Last Post: 03-03-2008, 07:20 PM
By Green Hulk in forum Open DiscussionReplies: 43Last Post: 01-16-2008, 12:38 AM
By Cody Townsend in forum Sea Doo Open DiscussionReplies: 0Last Post: 05-02-2006, 02:40 PM
By Jrsrxp in forum 4-Tec PerformanceReplies: 6Last Post: 04-30-2005, 10:18 AM