Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 21
  1. #1
    SLASHER's Avatar
    Join Date
    Jun 2007
    Location
    Australia, Perth WA
    Posts
    3,263
    +1
    474

    Whats the best intercooler to run with a XXX SC

    Hi guys , i have heat fade at the moment with my exsiting Piranha IC ...

    It doesn't help thats its summer here and water temps and air temps are up ...

    What would be the best IC to run with a Stage 3 open loop running a Riva XXX ...


    Also what restricter size should I be running after the jet pump ?


  2. #2
    Banned User
    Join Date
    Aug 2009
    Location
    Discovery Bay, CA
    Posts
    3,048
    +1
    336
    who's open loop kit?

  3. #3
    Eric Ocman's Avatar
    Join Date
    Aug 2008
    Location
    Cataula, Georgia, United States
    Posts
    4,700
    +1
    77
    [QUOTE=SLASHER;1615992]Hi guys , i have heat fade at the moment with my exsiting Piranha IC ...

    It doesn't help thats its summer here and water temps and air temps are up ...

    What would be the best IC to run with a Stage 3 open loop running a Riva XXX ...


    If you are mostly doing short runs and XS is probably best. If you are doing longer runs you need one of these bro. It takes some work to make it fit but it does indeed fit.

    http://cgi.ebay.com/ebaymotors/Large...Q5fAccessories


    There are a few different models of the one above.

  4. #4
    SLASHER's Avatar
    Join Date
    Jun 2007
    Location
    Australia, Perth WA
    Posts
    3,263
    +1
    474
    Running a modded Riva open loop with thermostat ...

    My C-kit was leaking oil so Iam to remove and flush the IC out incase there is a heap of crap in it from the oil ...

    Ocman thanks for the link ...

    The biggest IC i have seen is the one that Les Cook has but they are big $$$ but they are massive...

  5. #5
    Sayers's Avatar
    Join Date
    Jul 2010
    Location
    Melbourne AUS
    Posts
    2,300
    +1
    134
    Just about anything Les Cooke = $$$$$$$$$............. but if your happy to empty your wallet I guess you can sleep well knowing that you have top qualty and proven performance.
    I live in Melbourne 30 minutes from Seadoo Centre but chose other options to get better bang for my buck.

    You could check these out. They state on their site that they use the correct cores. Some Ebay units use an air to air core and not the correct liquid to air core.
    http://www.frozenboost.com/product_i...91206d20c5ad5a

  6. #6
    SLASHER's Avatar
    Join Date
    Jun 2007
    Location
    Australia, Perth WA
    Posts
    3,263
    +1
    474
    Thanks Sayer good to see some Aussie support ...

    I have taken almost all LC gear out as they have failed and replaced with custom stuff and Riva ..

    You will know the high temps over here in Perth I talking about ..

  7. #7
    Banned User
    Join Date
    Aug 2009
    Location
    Discovery Bay, CA
    Posts
    3,048
    +1
    336
    If you have the riva open loop kit it should have come w/ a restrictor for the pump. If not ill measure mine for ya when i get home.

  8. #8
    SLASHER's Avatar
    Join Date
    Jun 2007
    Location
    Australia, Perth WA
    Posts
    3,263
    +1
    474
    I have a 9mm water restrictor...

    Thats the washer that sits between the pump and the transom?

  9. #9
    home of the dislexic fingers breon's Avatar
    Join Date
    Aug 2007
    Location
    port st lucie fl
    Posts
    3,471




    i like it

  10. #10

    hmmmm interesting

    Quote Originally Posted by SLASHER View Post
    Thanks Sayer good to see some Aussie support ...

    I have taken almost all LC gear out as they have failed and replaced with custom stuff and Riva ..

    You will know the high temps over here in Perth I talking about ..
    Are you saying you pulled out all ur les cooke parts and replaced it with what riva and custom stuff? like what im really curious to no what failed and what part you changed to that is better

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 373 or 410 what's the best gear to run
    By Kww in forum Open Discussion
    Replies: 4
    Last Post: 02-25-2015, 01:48 PM
  2. Carbon seal: So whats the best way to check?
    By SeaDoocer in forum 4-Tec Performance
    Replies: 35
    Last Post: 07-12-2013, 08:47 PM
  3. Replies: 1
    Last Post: 06-01-2013, 02:07 AM
  4. Whats the best way to run open loop cooling
    By oenlegman in forum 4-Tec Performance
    Replies: 2
    Last Post: 06-01-2010, 02:56 PM
  5. whats the best waterbox to run on a 951 gtx
    By jasonatletitridecustoms in forum 2-Stroke Performance
    Replies: 4
    Last Post: 11-28-2009, 10:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •