01-16-2011, 11:28 PM #1
Parting Out (or selling whole) 2004 RXP
So the time has come to move on from my current RXP. I have enjoyed it but have just lost interest so I will be looking into getting into something else for the coming summer. Not sure what yet so I am going to hold onto some stuff in case it's another RXP....
Riva ECU & Injectors (for 04) - $500
- $200 add the throttle body (I think u need it if you don't want to have Riva re-
program). I would rather just do the ECU and injectors and leave the throttle body with
-Shortblock. - $1500 (+$400 for ECU & plus $500 for head)
Needs a rebuild. It is actually in pretty good shape. Never had any problems but
I've been chasing a issue with the headgasket (block and head may just need to be
milled) and it has sat all summer so I would suggest a rebuild. Plus it has a little over
100 hours on it. Rebuild was in my plans just don't want to hassle with it. I would
include all the stock electrics needed to run it and would probably be inclined to
throw in the Riva ECU and injectors for $100 less than by themselves. Head would
not be included but could be had for extra. Shortblock is OEM except for block guard
and oil jet installed. Never been submerged or had any troubles. It just needs some
love and I am not inclined to put any more effort into it. It cranks on the trailer and
idles great as it sits but the minute you put any load on it it dumps all the coolant
and overflows the catch can and it gets into the oil (I am 99% positive the issue is
between the block and head just haven't had the time to screw with it since I had my
-Head - $500
Head may need to have the deck checked. I have already taken 10 thou off last time
i had it off. Head has Riva VT, Ferera valves and lightweight cam sprocket. 2 of the
valve cover bolt need to be repaired (they were threaded a little tight and will nto
purchase anymore but any good machine shop could fix easily.) This price would
include everything (head ready to bolt up if you wanted to forgo a trip to the
-Jims closed loop ride plate - $200 (skegs welded on)
-Riva grate (and insert) - $75
-UMI steering setup and Kawi bars - $350
It might not be a bad idea to press new bearings in while it's off the boat but it works
-Greenbox - $150
I painted it black with header paint before installed (was keeping the engine
compartment a little less "shiny"
-Riva 1st gen IC - $200
Saw salt ater for maybe 3 hours total. Was always flushed out and pressure tested
regularly. I installed anodes on it. Would include bracket and the plumbing i have
(the SC to IC pipe is aluminum and the IC to TB is plastic)
-Supercharger - $150
Has a 1st gen Riva/Vortech wheel in it. Would be a nice set of cases but the guts
would need a rebuild (probably not a steep enough SC for most of you power fanatics
I would let the whole ski go as is (clean title in hand) for $3,500.00 with all the parts. There are quite a few other parts on the ski (Jet-trim seat, Hydroturf mats, RE Blockoffs, Riva sponsons, Riva high flow hood, etc.) that I was planning on holding to. I would be willing to deliver it (within reason) from NE Florida (I live approx. 1hr west of Jacksonville) or meet someone half-way. If shipping you would be responsible for all shipping arrangements and I would throw in a little extra cost to crate it and drop it off at the shipping establishment you use.
I haven't been up to speed on the market for all of this for a good 9 months so if these prices are not in line with what things are going for I am open minded. I just kind of want to start fresh and send this toy on it's way.
Last edited by Sirhc7897; 01-30-2011 at 11:07 PM.
01-16-2011, 11:31 PM #2
Forgot to add:
-Exhaust Manifold - $200
Has Mitch's mod to the end (the steel tip)
Have a J-pipe too that I'd let go if I really started parting out (motor, head, etc. sold) Hell, if it got to that point I'd sell you anything off the ski you wanted once some of the larger stuff disappeared.
01-17-2011, 09:17 AM #3
Chris, As the rules reguarding sales of skis,motors or hulls i will need a pic posted here of the VIN number to continue to allow the sale of this ski to continue...Its nothing personal,just a security issue to help against stolen skis...If you cannot post a pic of the VIN number i unfortionatly will have to remove the thread...Thanks my friend,I hope you understand.
IMPORTANT NEW REQUIREMENT
The HIN and Motor serial number must be listed in the sale of any ski, hull or motor. Photo evidence of this is required in the ad. Failure to post this will result in the ad being pulled.
01-17-2011, 11:23 AM #4
pm sent on RE block offs, seat, and UMI...
01-17-2011, 12:59 PM #5
UMI steering setup and Kawi bars - $350 please i am really interested on this and i could pick up today, please pm you phone number so we could talk.or this is my number if you want to call me 305-726-1461 thank
01-17-2011, 01:05 PM #6
01-17-2011, 01:11 PM #7
01-17-2011, 01:16 PM #8
01-17-2011, 01:17 PM #9
01-17-2011, 08:37 PM #10
- Join Date
- Jun 2007
I am interested in greenbox, rude tip, factory exhaust block, black plastics, riva ic, riva ecu and injectors, riva sponsons. Thanks!
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By J-ME in forum Honda SkisReplies: 14Last Post: 09-07-2008, 01:49 PM
By pepp101 in forum Polaris Open DiscussionReplies: 3Last Post: 08-04-2007, 09:32 PM
By john salveson in forum 4-Tec PerformanceReplies: 5Last Post: 07-30-2007, 12:27 PM
By JordanHaye in forum Sea Doo Open DiscussionReplies: 1Last Post: 04-08-2007, 04:00 PM
By [H]acksaw in forum Sea Doo Open DiscussionReplies: 5Last Post: 07-17-2006, 06:26 PM