01-26-2011, 04:51 PM #1
Exhaust Blockoff for RXP-X & RXT-X
I got my hands on 2 thru hull exhausts but I need the stock exhaust blockoff plugs. Anyone have them?
I need 1 for an RXP-X and one for an RXT-X...prolly the same thing...
01-26-2011, 06:41 PM #2
You may have trouble finding those separate from thru Hull kit.
I just used a big metal plug and install in hose connected to OEM thru fitting and put clamp arround hose.
Ill get you a pic latter.
01-26-2011, 07:01 PM #3
hmm...I see where you're going with that....a pic would be great!
01-26-2011, 08:39 PM #4
Only ones i could find.
Its a plug with lip.
I'll run it like that till a plug pops up.
I could shorten it with a short piece of hose is wanted.
Your ski has the plastic threaded 90, so would have to block it off after 90.
01-26-2011, 11:52 PM #5
Ahh, yeah, that's how I imagined it. I know the plastic elbow you're talking about. I'd have to have the elbow plus some exhaust tube and then a plug.
If I can't find a Riva type plug, I'm trying to think of what I could rig up to cover the hole from the outside...hmmm ...a flat piece of ABS with a hole drilled in it and a bolt through the center, with a bracket on the inside ...RTV the ABS on the outside...bam! But I'm a bit skeptical of that solution...gotta think some more.
01-27-2011, 09:17 AM #6
racetech makes an alu one. I think I have an extra if u want it. Ill check when I get home bro.
01-27-2011, 10:05 AM #7
01-27-2011, 12:40 PM #8
11 Allaura Blvd Unit #1, Aurora, ON. L4G 3N2
01-27-2011, 01:45 PM #9
01-27-2011, 06:43 PM #10
i just did mine and ace hardware had a perfect size rubberized cap with clamp, in the plumbing section for like 5bucks. fits over the stock piece perfectly and should work just fine.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By ipantoja2001 in forum Sea Doo ClassifiedsReplies: 0Last Post: 06-27-2008, 08:20 PM
By seadoo951 in forum 4-Tec PerformanceReplies: 16Last Post: 04-13-2007, 04:23 PM
By RXTStephen in forum 4-Tec PerformanceReplies: 5Last Post: 12-28-2006, 09:50 AM
By R-Doo in forum Sea Doo Open DiscussionReplies: 2Last Post: 11-14-2006, 03:34 PM
By Mark S in forum 4-Tec PerformanceReplies: 3Last Post: 08-01-2005, 11:31 AM