Results 1 to 6 of 6
  1. #1
    Never say never KirkF350's Avatar
    Join Date
    Jun 2005
    Location
    Midlothian, Texas
    Posts
    4,433
    +1
    3

    Going pre-mix on an Ultra150

    I am a chicken when it comes to oil injection, been burned once, so I want to go pr-mix. From what I have heard and read, the oil injection pump gives lubrication to the balancers on the engine. Since this is the case, I think a block off plate may be dangerous.
    Has anyone ever plugged the oil lines that only go to the carbs and kept the pump giving oil to the balancers?
    I have heard their pumps are great and I know I could change and properly secure, I just would feel better with premix. Plus my other skis are all pre-mix and I might save me from putting the wrong fuel in the wrong ski.


  2. #2
    way2fast's Avatar
    Join Date
    May 2005
    Location
    Melbourne Beach, FL
    Posts
    4,009
    +1
    4
    I kept the oil injection intact on my Ultra. For safety I always pre mix oil at a 100-1 ratio. I use Pennsoil 100% Synthetic two stroke oil in the oil tank and for the pre mix. If the pump should fail or a oil line come loose, the 100-1 could save the engine from seizing up. It's cheap insurance. I never fouled a plug and get very little smoke running it this way.

    Richard

  3. #3
    Never say never KirkF350's Avatar
    Join Date
    Jun 2005
    Location
    Midlothian, Texas
    Posts
    4,433
    +1
    3
    That's a thought. I still would like to get to full pre-mix. I have 3 other skis that are pre-mix, lawn equipment, old school lawn-boy 2 stroke mower even. It makes it less confusing if all your gas cans have the same thing in them.
    I'm just getting older and loosing it mentally, so this justs cuts out the chance of screwing up any of them, or, I could fry them all.......

  4. #4

    Join Date
    Apr 2006
    Location
    panama city beach 'fl
    Posts
    1,846
    +1
    9

    Cool

    I think 150 has main line right to crank,may not be good idear to go that way ,ask kerry he would know

    later cd

  5. #5
    XL1200Ltd-Keith's Avatar
    Join Date
    Aug 2005
    Location
    Arizona
    Posts
    506

    premix

    Check the Group K website, read "about oil injection". http://www.groupk.com/k1200-1pipe.htm
    Last edited by XL1200Ltd-Keith; 11-10-2006 at 02:11 AM.

  6. #6
    Never say never KirkF350's Avatar
    Join Date
    Jun 2005
    Location
    Midlothian, Texas
    Posts
    4,433
    +1
    3
    Thanks Keith. Good reading.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. oil everywhere gunna go pre mix
    By 2000slx1200 in forum Polaris Open Discussion
    Replies: 19
    Last Post: 07-03-2010, 12:50 PM
  2. Running pre-mix on 951's????
    By OutlawGPR in forum 2-Stroke Performance
    Replies: 3
    Last Post: 07-20-2009, 06:01 PM
  3. polaris going pre mixed
    By brucek66 in forum Polaris Open Discussion
    Replies: 3
    Last Post: 05-05-2009, 04:43 PM
  4. Going Pre-mix....Question
    By rob2337 in forum Polaris Open Discussion
    Replies: 3
    Last Post: 08-27-2007, 11:20 PM
  5. Jetworks kit on an Ultra150
    By KirkF350 in forum Kawasaki PWC Performance (2-stroke)
    Replies: 19
    Last Post: 04-16-2007, 05:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •