02-13-2011, 07:44 PM #1
Where I can buy T-Bolt Clamps for the X IC and which size?
Im searching for T-Bolt Clamps for replacing the stocks ones...
I need to know which are the size and where its the best place to buy them.
many thanks in advanced
02-13-2011, 07:50 PM #2
02-13-2011, 08:58 PM #3
or cxracing.com and all pipes are 2.5". throttle body is tight - so you could go 2.75". XC IC outlet is 3".
02-13-2011, 09:55 PM #4
02-14-2011, 09:51 AM #5
- Join Date
- Jan 2009
- Scotland, UK
Yep, go with stainless steel if your gonna get them. Hell of a lot easier that trying to cut the steel bolts off.
02-14-2011, 10:10 AM #6
02-14-2011, 01:41 PM #7
(2) 3" T bolts for IC
(2) 2.75" T bolts for TB and SC
(4) 2.5" T bolts for pipes
Always good to buy a few extra in case you snug down too hard and break one or want to replace all the various screw head type with T bolts to be on the safe side.
02-14-2011, 07:40 PM #8
McMaster-Carr has just about every Stainless Steel Clamp and Fastener (and a whole lotta other stuff) imaginable.
If they dont have it then try http://www.siliconeintakes.com/index...91118779bd7a1c
Turbosmart Murray Constant Tension Hose Clamps
(these are high-dollar---but the best)
02-18-2011, 02:04 AM #9
Summit Racing in Akron, OH has a good variety of sizes also.
02-18-2011, 09:16 PM #10
- Join Date
- Dec 2008
- Bowling Green Ky
get on ebay motors and search for t-bolt clamps and size you need. you will find the same ones that are used with the xs intercooler kits and they will hold as much boost as you will throw to them from one of these superchargers. we use them for turbo cars and they are holding anywhere from 7psi to 30psi. on my daily nissan 240 i am pushing 19psi and they hold fine
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By GYTWYPT in forum 4-Tec PerformanceReplies: 9Last Post: 06-25-2008, 09:37 PM
By GYTWYPT in forum 4-Tec PerformanceReplies: 10Last Post: 06-22-2008, 12:39 AM
By cbrich in forum Sea Doo Open DiscussionReplies: 3Last Post: 04-13-2008, 03:01 PM
By Mark S in forum 4-Tec PerformanceReplies: 11Last Post: 04-25-2007, 05:58 AM
By meeper in forum 4-Tec PerformanceReplies: 0Last Post: 03-06-2007, 09:23 AM