02-21-2011, 04:04 PM #1
WTB- 03 xlt driveshaft and intermediate shaft/coupler
working on a ski-03 xlt, and the customer gave me the wrong setup. im looking for the correct drive shaft and intermediate. i believe the drive shaft i have is too short or the coupler is not correct. its not splining. or if anyone can give me the length ill measure. i think the problem lies in the intermediate
got what i needed. thanks crash hard!!!!
Last edited by SUCKMYWAKE; 03-02-2011 at 09:49 PM.
02-21-2011, 09:39 PM #2
02-22-2011, 12:23 PM #3
Once the newest snow melts, I'll go have a look.Which one should i have?
02-25-2011, 11:11 PM #4
There are slight variations with the XLT's with 1 model year. I think the 01's are different. I wonder if he gave you one of those. I didnt realize and had ordered the wrong part thinking it was all interchangeable. The driveshaft on the new skies was shorter and the Intermediate was a little longer on the inside splines. If this is the case check the intermediate part number on the one he gave you. If incorrect it will make the proper drive shaft seem to short as its inside splines are set too far back for the 01 model year longer drive shaft.
02-26-2011, 08:07 AM #5
You have the GP1200R / XL1200 intermediate and a short (28 in) 2002 driveshaft
You can fix it by either getting the GP1300R intermediate or by getting the long (30 in) driveshaft
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By YOUNGGUNZ403 in forum Yamaha ClassifiedsReplies: 4Last Post: 08-19-2008, 02:52 PM
By jeffsntx in forum Yamaha ClassifiedsReplies: 2Last Post: 07-29-2008, 02:56 PM
By manu in forum Yamaha ClassifiedsReplies: 1Last Post: 07-20-2008, 10:54 AM
By YOUNGGUNZ403 in forum Yamaha ClassifiedsReplies: 7Last Post: 06-24-2008, 03:23 PM
By WATER WOODY in forum Conversion Skis ClassifiedsReplies: 4Last Post: 02-04-2008, 02:40 PM