02-26-2011, 03:17 PM #1
GP1300 Air Leak or Not Enough Fuel?
Take a look at the pics full rebuild before last summer and it probably only ran for maybe 5 hours back cylinder has burned through and the front cylinder looks a little lean and the middle is about right (I think?) No EFI controller with some simple bolt ons (stuffers, gutted airbox) and some freebies. I need help! Tired of messing with the damn thing
02-26-2011, 03:27 PM #2
02-26-2011, 04:57 PM #3
Kinda looks like low/no oil. Had a friends burn a piston like that and he had forgotton to put oil in the tank. Check to see if the oil lines are in place on carbs or intake manifold.
02-26-2011, 05:19 PM #4
Its fuel injected with block off plate so its running premix at 40:1
02-26-2011, 06:57 PM #5
- Join Date
- Apr 2006
- panama city beach 'fl
looks like lean 1&3 could be injector or think about it-crank seal at both ends! pressure checking motor is really a must
welcome to greenhulk ,your not the first to be chase problems.search button may help but here think not
start again and leak test motor!!
02-26-2011, 07:00 PM #6
- Join Date
- Oct 2005
air leak`s got my vote...
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By K447 in forum Polaris Open DiscussionReplies: 5Last Post: 08-17-2008, 09:19 PM
By Mongoose in forum Yamaha Open DiscussionReplies: 2Last Post: 12-16-2007, 01:15 PM
By nev350 in forum Yamaha PWC Performance (2-stroke)Replies: 1Last Post: 05-14-2007, 07:19 AM
By kevski in forum Yamaha PWC Performance (2-stroke)Replies: 20Last Post: 07-06-2006, 06:28 PM
By BadinGPR in forum Yamaha PWC Performance (2-stroke)Replies: 7Last Post: 06-02-2006, 06:17 AM