02-28-2011, 06:50 PM #1
RUDE FUEL Controller install (cables)
I just bought a RUDE fuel controller and i have a couple of questions...
1.-i have 2 small cables and 1 large one that cames out of the unit...
I imagine i need to override the little blue stuff under the controller with this 2 cables as i shown in the picture......
The large cable goes instead of the one insert in the TPS ?? and what i do with the connector its already there....or goes into another place?
here is the picture...
wait any help ...
many thanks in advanced
02-28-2011, 07:09 PM #2
In the first pic it looks right (i'm on an iphone), it looks like your in the MAP sensor area, the other two connectors need to be plugged in to the CAM position sensor and wireing.
02-28-2011, 07:13 PM #3
The second pic is the throttle body. The longer connector coming out of the controller goes to the cam sensor located on the cylinder head.
02-28-2011, 09:07 PM #4
02-28-2011, 09:13 PM #5
03-01-2011, 09:59 AM #6
If I remember correctly, isn't each connector on the wire harness different/unique? In that, if you find a plug for each connector of the controlelr, it HAS to be the correct plug/connection?
03-01-2011, 10:04 AM #7
03-01-2011, 10:14 AM #8
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By JFizzleJR in forum 4-Tec PerformanceReplies: 5Last Post: 08-20-2008, 03:36 PM
By JFizzleJR in forum Sea Doo ClassifiedsReplies: 5Last Post: 06-30-2008, 12:50 AM
By grantuk in forum Sea Doo ClassifiedsReplies: 1Last Post: 06-14-2008, 10:26 AM
By psycho rxp in forum Sea Doo ClassifiedsReplies: 35Last Post: 05-27-2008, 05:58 PM
By BlackHawk in forum Sea Doo ClassifiedsReplies: 0Last Post: 05-14-2008, 07:48 PM