Results 1 to 4 of 4
  1. #1
    mike1706's Avatar
    Join Date
    Dec 2008
    Location
    ,Florida
    Posts
    1,691
    +1
    16

    how to removed the insert of gpr

    hi to everyone on the forum i having a little problem removing my insert for shoe, and plate and will all be replaced with the new style 05 gpr. a friend of mine told me to do it with a heat gun and it will pop out like nothing and other guy told me to do it with a screw and a hammer but i am afraid to brake the hull please let me know how i could do it and the easy way to do it


  2. #2
    Happily Self-Employed WFO's Avatar
    Join Date
    Nov 2005
    Location
    Houston, Texas
    Posts
    12,801
    +1
    450
    heat gun makes the glue soft so you can remove it easier, but I use a chiesel and hammer... catch the edge between the glue and hull, drive the chiesel in about a 1/2 inch or so and pry it up... most of the time it pops out in one piece

  3. #3
    mike1706's Avatar
    Join Date
    Dec 2008
    Location
    ,Florida
    Posts
    1,691
    +1
    16
    Quote Originally Posted by WFO View Post
    heat gun makes the glue soft so you can remove it easier, but I use a chiesel and hammer... catch the edge between the glue and hull, drive the chiesel in about a 1/2 inch or so and pry it up... most of the time it pops out in one piece
    but you use the heat gun first to make the glue soft or you just use a chiesel and hammer

  4. #4
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,929
    +1
    1,407
    I like to heat up the glue blob then put a screw into the insert and give it a good wack with a WFO approved dead blow hammer.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. how to remove the head?
    By seadoor in forum 4-Tec Performance
    Replies: 63
    Last Post: 07-03-2016, 11:04 AM
  2. How to remove the Shaft out of the Pump ???
    By RXP-X 2011 in forum Sea Doo Spark
    Replies: 5
    Last Post: 07-31-2015, 06:00 AM
  3. Water in the motor. What kind of damage should i expect and how to remove the water.
    By Gunmetal04 in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 05-20-2013, 05:46 PM
  4. How to Remove the Throttle Body
    By johnD in forum 4-Tec Performance
    Replies: 11
    Last Post: 04-21-2007, 11:39 AM
  5. How-To: Removing the engine cowling.
    By MikeTrin in forum Sea Doo How To & FAQs
    Replies: 8
    Last Post: 06-23-2005, 10:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •