Thread: Help measuring for Jet Wings
11-15-2006, 08:09 AM #1
- Join Date
- Jul 2006
Help measuring for Jet Wings
Last edited by Alex13; 11-15-2006 at 08:32 AM.
11-15-2006, 12:44 PM #2
Alex, they should have provided you with a clear template to lay over the bolt holes. Have someone hold the template over the bolts and mark the bolt locations with a marker.
Tip: Make sure the template is nearly all the way back to the OPAS opening that way the Jet Wings will come ready to bolt up in the ideal location (as far back as possible)
11-15-2006, 12:52 PM #3
the bolt pattern is not different... you can interchange all the year sponsons and have the bolt holes line up... the problem is the depth of the spacer on the outside of the hull. 03-04 skis the depth of that spacer is thicker/deeper and the spacers are more square-ish... 05-06 skis the sponson spacers are more rectangular and they are thinner
so if u were to take 05 sponsons and put them on an 04 ski.. the bolt holes are perfect, but the sponson would not completely go against the hull since the 03-04 spacer is thicker, thus shimming the sponson away from the hull a bit.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Fasttimez in forum Yamaha PWC Performance (4-stroke)Replies: 11Last Post: 06-07-2014, 09:27 PM
By jamesbern in forum Sea Doo Open DiscussionReplies: 8Last Post: 04-15-2012, 09:55 PM
By Vern in forum 4-Tec PerformanceReplies: 11Last Post: 02-15-2006, 11:30 PM
By rxpblast in forum 4-Tec PerformanceReplies: 27Last Post: 02-06-2006, 05:19 PM
By Top banana in forum 4-Tec PerformanceReplies: 9Last Post: 10-10-2005, 02:49 PM