Results 1 to 3 of 3
  1. #1
    fussy1's Avatar
    Join Date
    Aug 2007
    Location
    New Zealand
    Posts
    550
    +1
    8

    Getting the brake bucket to stay up??

    Hi guys, anyone know how to get the brake bucket to stay up so I can work around the pump area of my TX 260 ??
    I'm waiting for my owners manual to show up, so don't know if it tells you in there or not.
    Cheers


  2. #2

    Join Date
    Sep 2010
    Location
    South Florida
    Posts
    1,599
    +1
    123
    Quote Originally Posted by fussy1 View Post
    Hi guys, anyone know how to get the brake bucket to stay up so I can work around the pump area of my TX 260 ??
    I'm waiting for my owners manual to show up, so don't know if it tells you in there or not.
    Cheers
    Push the mode button until you get to the "setting" display. Press set button and the "IBR OVR on" display should appear on the screen. Press the set button again and "IBR OVR OFF" should appear in the display. Press the up/down aprrow on the right handle bar until the display reads "IBR ON". Then use the VTS up button to raise the bucket. You will need to push it repeatedly as the bucket will only raise a little each time you press it. I think I got the right (off memory only) but it should be close enough so you figure it out. Good luck...

  3. #3
    I like the old days when it was just a cable and a spring. I must be getting old.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Getting the fx in to the 80's
    By Phil.Borg in forum Yamaha PWC Performance (4-stroke)
    Replies: 6
    Last Post: 05-11-2010, 12:16 AM
  2. getting the rxp x to 70...
    By joeyo in forum 4-Tec Performance
    Replies: 45
    Last Post: 03-10-2009, 06:13 PM
  3. Lake of the ozarks? Where to stay?
    By Plrs X45 in forum Polaris Open Discussion
    Replies: 2
    Last Post: 08-20-2008, 08:56 PM
  4. Can't Get The Pdf Manuals To Load
    By riptide5 in forum Polaris PWC Performance
    Replies: 2
    Last Post: 01-19-2008, 09:13 PM
  5. What does it take to get the Yammi's to run ...
    By MIARider in forum Yamaha PWC Performance (2-stroke)
    Replies: 14
    Last Post: 09-12-2007, 06:55 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •