Results 1 to 2 of 2
  1. #1

    Join Date
    Jun 2009
    Location
    grand cayman
    Posts
    124

    will i be ok with 42s?

    ok so finally got boat back together and was figuring out what i had and what was sold to me that is didnt get blah blah

    so the list is
    walbro fuel pump
    rrfpr riva set at 60 lbs
    stock rxpx 42s
    and the 1st generation riva wheel and housing for the x boat pushing 20 percent more boost they say
    les cooke 8650 ecu


    shoud i still check the afrs?

    also i bought some 48s thinking it was a riva xx charger that i bought.
    So last question which charger should i get for circuit racing staying on pump gas?


  2. #2
    R88ory RXP's Avatar
    Join Date
    Feb 2008
    Location
    Kent, England
    Posts
    2,737
    +1
    46
    Quote Originally Posted by GPRXP4ME View Post
    ok so finally got boat back together and was figuring out what i had and what was sold to me that is didnt get blah blah

    so the list is
    walbro fuel pump
    rrfpr riva set at 60 lbs
    stock rxpx 42s
    and the 1st generation riva wheel and housing for the x boat pushing 20 percent more boost they say
    les cooke 8650 ecu


    shoud i still check the afrs?

    also i bought some 48s thinking it was a riva xx charger that i bought.
    So last question which charger should i get for circuit racing staying on pump gas?
    I would run the 48s and turn your base down to say 55, The ECU you have now will run lean added to the extra boost is gona need more fuel.

    I say this coz Riva say to got to 50s when you fit the upgrade wheel, add that to a Re-map that will run lean is telling me that the 42s just aren't going to be enough even with the RRFPR.

    I would go with the Mini Rude, it's almost as powerful as a 2Rude but a lot less money for you coz it will go straight on your charger rather then getting a whole new one or having to get yours machined for a 140mm wheel.

    R88

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Newbie GPR girl - mixed yamalube 2m with 2w - will it be ok? // ? D plate?
    By christyt in forum Yamaha PWC Performance (2-stroke)
    Replies: 23
    Last Post: 10-04-2012, 05:47 AM
  2. Replies: 3
    Last Post: 08-09-2011, 11:35 AM
  3. Will this be ok?
    By SkiBoy720 in forum Towing and Trailers
    Replies: 5
    Last Post: 05-12-2011, 08:31 PM
  4. Screw Missing -- Will I be OK?
    By z28pwr in forum Kawasaki PWC Performance (4-stroke)
    Replies: 3
    Last Post: 12-07-2008, 12:13 AM
  5. Will I be needing Riva control EFI 1300 with this mods..
    By ExciterGPR in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 07-02-2006, 02:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •