Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12

Thread: oil problen

  1. #1
    seadoor's Avatar
    Join Date
    Nov 2006
    Location
    Puerto Rico
    Posts
    538

    oil problen

    i have a gtxlimited s/c 04 185hp . the problen is we you start the boat in the water .its have aoil warning for about 20 30 second . the oil its ok ,what would cause this . and then the boat ran great .any help will be apreciated


  2. #2
    Resident Jicky Jack Jeff C's Avatar
    Join Date
    May 2005
    Location
    Twin Cities, MN
    Posts
    1,153
    oil pressure sensor might be bad

  3. #3
    seadoor's Avatar
    Join Date
    Nov 2006
    Location
    Puerto Rico
    Posts
    538
    HOW I CHECK THE SENSOR IT HAVE A OHM MEASURE

  4. #4
    BOOSTED's Avatar
    Join Date
    Oct 2006
    Location
    ARUBA
    Posts
    359
    Take it to the dealer

  5. #5
    Quote Originally Posted by BOOSTED View Post
    Take it to the dealer
    although I`m doubtful if you have a good tech, I`d say atleast have tham check it out. Could very well be oil pumps, or sensor...BUDS VCK will show something...PR...

  6. #6
    seadoor's Avatar
    Join Date
    Nov 2006
    Location
    Puerto Rico
    Posts
    538
    i take to the dealer buds nosay no problen

  7. #7
    Quote Originally Posted by seadoor View Post
    i take to the dealer buds nosay no problen
    This is true, there is no data for oil pressure issues nor can the BUDS read the 2 dif sensors bc they are not recognized in the software. Now why in the hell would BRP omit a very important sensor in their programs.
    I looked today with the BUDS, there isn`t even a fault set when the damn oil alarm goes off.
    That`s the way to do it BRP, another good way to keep your customers, NOT...PR...

    the procedure to test the sensor is with an OHM meter, engine off and engine on, you have to ground the sensor wire to ground when performing this test so you don`t set the safe mode. the other test is to put a tester gauge in the sensor port and also ground the wire. Worse case senario, is also to check wire itself in the loom all the way to the pin in the ECU connector... First replace the sensor and go from there...

  8. #8
    seadoor's Avatar
    Join Date
    Nov 2006
    Location
    Puerto Rico
    Posts
    538
    i replace the sensor today but still have the problen .sensor new, i change the oil,filter ,oring. but no lucky.i turn on the boat and for 30 second the oil warning appear then go off. and the run perfect.what could cause this low oil preasure,bad oil pump .any help will be apreciated
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSC00034.JPG 
Views:	39 
Size:	1.35 MB 
ID:	10872  

  9. #9
    Quote Originally Posted by seadoor View Post
    i replace the sensor today but still have the problen .sensor new, i change the oil,filter ,oring. but no lucky.i turn on the boat and for 30 second the oil warning appear then go off. and the run perfect.what could cause this low oil preasure,bad oil pump .any help will be apreciated
    What year ski do you have?...PR...

  10. #10
    seadoor's Avatar
    Join Date
    Nov 2006
    Location
    Puerto Rico
    Posts
    538
    04 s/c 185 hp

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How-To: Oil Change
    By Sunfunzoom in forum Sea Doo How To & FAQs
    Replies: 280
    Last Post: 06-28-2017, 08:34 PM
  2. 10 Hrs. on RXP oil change??
    By RXPNJ in forum 4-Tec Performance
    Replies: 18
    Last Post: 09-09-2006, 08:55 AM
  3. Oil Level question , this thing mixes me up :(
    By rxp_boy in forum 4-Tec Performance
    Replies: 4
    Last Post: 05-23-2005, 10:03 AM
  4. RXP oil level after 10 hour srv.
    By Water4fire in forum 4-Tec Performance
    Replies: 3
    Last Post: 05-22-2005, 12:00 AM
  5. I might have a oil leak in the RXP
    By Jrsrxp in forum 4-Tec Performance
    Replies: 2
    Last Post: 05-02-2005, 12:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •