Results 1 to 3 of 3
  1. #1

    Join Date
    Jan 2011
    Location
    Brisbane Australia
    Posts
    152

    LFR6A v's LFR6A-11

    Is it true the only difference between these two plugs is the factory pre set gap ?
    If I have the 11's and I gap them to .8 mm will that be fine ?
    What would be the issue if I ran the ski with the plugs set at 1.1 mm ?

    Thanks

    Dan


  2. #2
    dawson's Avatar
    Join Date
    Apr 2007
    Location
    AUSTRALIA
    Posts
    525
    yes the -11 designation is for the 1.1mm gap

    i actually ran my turbo boat once at low boost 18-19 psi at 1.1mm with out thinking and it didnt worry it

  3. #3

    Join Date
    Jan 2011
    Location
    Brisbane Australia
    Posts
    152
    It seems that the .8 mm gap is very important. With the 1.1 gap the ski would hardly hold an idle, re-gapped to .8 mm the ski idled 100%.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 11-DONE!
    By Tube Master in forum Sea Doo Open Discussion
    Replies: 4
    Last Post: 11-30-2005, 11:50 PM
  2. 11's dream ski
    By Green Hulk in forum Sea Doo Open Discussion
    Replies: 18
    Last Post: 11-15-2005, 05:40 AM
  3. Next "do it Jerry" from 11...
    By 11 in forum 4-Tec Performance
    Replies: 10
    Last Post: 10-10-2005, 08:25 AM
  4. Will 11 buy an RXP or RXT?
    By MikeTrin in forum Sea Doo Open Discussion
    Replies: 9
    Last Post: 07-28-2005, 04:28 PM
  5. hey Jerry, or Miketrin, or 11, or anyone who would know...
    By theantiRXP in forum Sea Doo Open Discussion
    Replies: 1
    Last Post: 05-23-2005, 08:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •