03-17-2011, 08:14 PM #1
- Join Date
- Mar 2011
Brand New RXT-X pulling to the right
Just purchased a brand new 2011 RXT-X and it is pulling to the right. What would cause this and is there an easy adjustment?
03-17-2011, 08:37 PM #2
03-18-2011, 10:51 AM #3
Cause is steering cable/nozzle adjustment required and is VERY easy to fix. First, read your Owners Manual for steps to raise the iBR gate - a little complicated at first but you'll remember for future use.
Once iBR gate is in raised position, use 2 10mm wrenches disconnect steering cable from nozzle, lengthen/shorten cable with adjustment screw, re-install, test. Take tools with you to lake, test the steering, go back to boat ramp, put ski on trailer to re-adjust if required. This a common minor adjustment - very easy to fix!
You are going to need to know how to raise the gate at the lake to check the pump/nozzle area for obstructions, hoses, clamps, etc.
03-18-2011, 04:56 PM #4
i stick a ruler across the end of the nozzle and look at it compared to the rear of the ski...so i can see the alignment better..
03-18-2011, 06:01 PM #5
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By DarthAWM in forum 4-Tec PerformanceReplies: 14Last Post: 07-28-2008, 07:50 AM
By Goliath in forum Polaris Open DiscussionReplies: 38Last Post: 07-01-2008, 11:51 AM
By Bone1050 in forum Polaris Open DiscussionReplies: 7Last Post: 02-02-2008, 07:37 PM
By scottyj in forum 4-Tec PerformanceReplies: 20Last Post: 12-09-2007, 04:07 PM
By Yellow04RXP in forum 4-Tec PerformanceReplies: 5Last Post: 05-14-2007, 02:05 PM