03-23-2011, 09:41 PM #1
- Join Date
- Jun 2010
I am trying to find out what size oil lines I need for my 2004 800xlt. How long I would need to buy? Are all the oil lines the same size? Where can I buy?
Wave eater clips....how many do I need? Is there a kit with everything I need? where can I buy? Is there a post describing how to install?
Thanks a ton!!!
03-23-2011, 09:59 PM #2
you need 2 of these... as far as the oil lines, you can just replace the all the hose, or just snip the ends off where they connect about 1/4 inch and re-connect a fresh piece then zip tie or wire tie them on
I have some oil line in stock... I am thinkin its 1/8inch tygon
as far as replacing them, the oil pump is easy to get to, but the carb side is covered by the exhaust pipe, so it will have to be removed to see what you are doing
03-23-2011, 10:03 PM #3
I bought the Fast Flow Fuel Lines, 1/8". I bought 7 feet and it was more than enough to do both of my old 95 WaveVentures. But you may want to measure what you have. It is probably the same ID, but it's better to check it to make sure.
03-24-2011, 11:23 AM #4
- Join Date
- Oct 2005
I used the 1/8 tygon for the oil lines. also found at McMaster Carr
03-24-2011, 11:57 AM #5
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)