Results 1 to 4 of 4
  1. #1
    Duppy no who fi frighten, Make Dem Try Good2Go16's Avatar
    Join Date
    Mar 2009
    Location
    Grand Cayman, Cayman Islands
    Posts
    489

    GP1300R not firing.

    The issue is as the title states the bike ain't firing, an I suspect its the stator assembly, cause that's what generates the fire, but I rather hear feed back from you guys that no more about the gpr's. Is there anything else I should check before I spend $400 to buy a new one?

    A friend of mines said check the sensor on the exhaust an see if its plugged in an not corroded, I checked that an its fine. he also said to check a sensor on the throttle body assembly, checked that as well an its all good.

    Any input on this problem will be greatly appreciated.


  2. #2
    Happily Self-Employed WFO's Avatar
    Join Date
    Nov 2005
    Location
    Houston, Texas
    Posts
    12,801
    +1
    450
    Rear water temp sensor on bottom of pipe near waterbox

    Throttle cable too tight (not coming back to true idle)

    Bad start/stop switch

  3. #3
    Duppy no who fi frighten, Make Dem Try Good2Go16's Avatar
    Join Date
    Mar 2009
    Location
    Grand Cayman, Cayman Islands
    Posts
    489
    Thanks, will check it out today.

  4. #4
    Mongoose's Avatar
    Join Date
    Aug 2005
    Location
    Wales
    Posts
    665
    +1
    6
    Hi, get a screwdriver and push on the throttle lever down between the cyls.Follow the throttle cable down to see the part. Just open and close throttle quickly with the throttle lever, and you will see the part moving up and down-you need to push it down about an extra 3-5mm when the the throttle is resting closed.
    This is a common problem with the throttle cable on the gpr's and there has been a recall notice for a new cable from Yamaha. Take it to your dealer for a FOC fix if pushing down with a screwdriver fixes it!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Gp1300r 2006 ran great on water for 4 hrs now not firing
    By chevyrocks3 in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 05-08-2012, 01:10 PM
  2. Help, 2005 GP1300R fuel injector are not firing!
    By madaboy in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 12-08-2009, 01:12 PM
  3. Gp1300r tick over but does not fire up. PLEASE anyone help me!
    By Waverider1300 in forum Yamaha How To & FAQs
    Replies: 16
    Last Post: 04-21-2009, 11:07 PM
  4. 2003 GP1300R Not Running To Well
    By lacfiremx02 in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 08-17-2006, 10:34 AM
  5. Fuel pump in gp1300r not working?
    By wildman326 in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 05-20-2006, 08:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •