Results 1 to 6 of 6
  1. #1

    drilling oil hole in sc

    So, i have 05 charger whit no that extra oil hole in sc.. doesent seem to be too hard to drill that in sc housing have anybody done that?


  2. #2
    Sayers's Avatar
    Join Date
    Jul 2010
    Location
    Melbourne AUS
    Posts
    2,300
    +1
    134
    You can do it.
    Would recommend installing a viton seal to stop oil leaking into the SC housing.

    If your looking at this you should also look at the 08 oiler, if your ski is pre 08. What charger you running?

  3. #3

    Join Date
    Apr 2008
    Location
    Plainfield, IL
    Posts
    1,237
    +1
    10
    +1. Hit up Jerrys store for the seal.
    http://www.4-tecperformance.com/inde...oducts_id=1664

  4. #4

    ok,

    Just purphased oem rebuilt set.. 2010model.. the charger is oem 2005 rxt charger..

    so no proublem to drill that hole? just make a clean hole like original..

    Viton seal is too expensive to order here in finland.. forgot that when i did order that rebuilt set

  5. #5
    Sayers's Avatar
    Join Date
    Jul 2010
    Location
    Melbourne AUS
    Posts
    2,300
    +1
    134
    If you have OEM charger and not installing Viton seal, do not drill the hole. You are asking for trouble without the Viton seal and the hole; see the HOW TO SECTION, X hole elimination tread.
    If you want the hole for better bearing oil supply, which is a great thing IMO you need the Viton seal.

    What year is your ski? I guess by your posts it's an 05? If you want to supply more oil to SC clutch assembly, get onto the 08 oiler mod. Far more of an advantage than the X hole, IMO.

    Quote Originally Posted by Tontsa80 View Post
    Just purphased oem rebuilt set.. 2010model.. the charger is oem 2005 rxt charger..

    so no proublem to drill that hole? just make a clean hole like original..

    Viton seal is too expensive to order here in finland.. forgot that when i did order that rebuilt set

  6. #6

    ok

    i forgot that drilling for now.. but what is that 08 oiler?

    ---------- Post added at 03:01 PM ---------- Previous post was at 02:50 PM ----------

    Quote Originally Posted by Tontsa80 View Post
    i forgot that drilling for now.. but what is that 08 oiler?
    OK, you mean to make that oil hole little smaller whit some nozzle?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. anybody ever drill the hole in supercharger housing?
    By krouchchocolate in forum 4-Tec Performance
    Replies: 20
    Last Post: 10-19-2011, 07:28 PM
  2. x charger upgrade - oil hole in shaft - mods?
    By jerryspringer in forum 4-Tec Performance
    Replies: 10
    Last Post: 10-15-2011, 08:06 PM
  3. X Charger oil hole location - drilling old style SC
    By Sayers in forum 4-Tec Performance
    Replies: 8
    Last Post: 02-13-2011, 01:32 PM
  4. Replies: 21
    Last Post: 02-14-2008, 03:42 PM
  5. Drilling Holes in the Hull
    By DrewNJ in forum Yamaha Open Discussion
    Replies: 0
    Last Post: 12-07-2007, 05:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •