Page 1 of 2 1 2 LastLast
Results 1 to 10 of 17
  1. #1
    5.0. alex_baker202's Avatar
    Join Date
    Aug 2007
    Location
    Lebanon, Missouri, United States
    Posts
    1,027
    +1
    24

    Depth finder on RXP

    Anyone ever add a depth finder to an RXP. what's the unit even look like?


  2. #2
    MSRXP's Avatar
    Join Date
    Sep 2010
    Location
    Central MS
    Posts
    5,448
    +1
    7
    Are you asking about an OEM depth gauge on the RXP? If so, it can be done but it wasn't built for it. The harness doesn't support it. However, you can add it if you know what you are doing. The problem is getting the ECU to recognize it. It was easier for me to buy an aftermarket depth gauge and install it. The one from BRP is for the RXT's I believe.

  3. #3
    Mod less, ride more! troyheb's Avatar
    Join Date
    Jul 2007
    Location
    Nederland, Texas
    Posts
    8,725
    +1
    1,267
    The Seadoo oem one I put on my TX also had instructions and wiring harness for install on a RXP.

  4. #4
    MSRXP's Avatar
    Join Date
    Sep 2010
    Location
    Central MS
    Posts
    5,448
    +1
    7
    Quote Originally Posted by troyheb View Post
    The Seadoo oem one I put on my TX also had instructions and wiring harness for install on a RXP.
    Interesting. I ordered one from the STEALER and didn't notice that part of the instructions. I would have stayed with that one. I will get it back out of storage and look again. For use with the stock display and ecu? Correct?

  5. #5
    5.0. alex_baker202's Avatar
    Join Date
    Aug 2007
    Location
    Lebanon, Missouri, United States
    Posts
    1,027
    +1
    24
    Ya I was wondering if I could use it in conjunction with my display. My mpem was reset and now shows a depth gauge readout but I didn't know if I could wire one in or not?

  6. #6
    Mod less, ride more! troyheb's Avatar
    Join Date
    Jul 2007
    Location
    Nederland, Texas
    Posts
    8,725
    +1
    1,267
    In the kit I got it had a suplement instructions for a RXP. It also had 2 wiring harnesses. The extra one was long enough to reach the front of a RXP where the fuse box is. Not sure where the sending unit goes on a RXP, but on the RXT there is a place near the water box molded in the hull. The dealer charged me $70 to hook it up to buds to activate it. Stock display and ecu.

  7. #7
    MSRXP's Avatar
    Join Date
    Sep 2010
    Location
    Central MS
    Posts
    5,448
    +1
    7
    Perfect. I will get it out and look at it again. I never unwrapped anything except for the instructions. Thanks!

  8. #8
    Mod less, ride more! troyheb's Avatar
    Join Date
    Jul 2007
    Location
    Nederland, Texas
    Posts
    8,725
    +1
    1,267
    Quote Originally Posted by MSRXP View Post
    Perfect. I will get it out and look at it again. I never unwrapped anything except for the instructions. Thanks!
    What year is your ski? I think Alex maybe sol. From what I have found it may not work on older RXP's Maybe just 2008 and newer.

  9. #9
    5.0. alex_baker202's Avatar
    Join Date
    Aug 2007
    Location
    Lebanon, Missouri, United States
    Posts
    1,027
    +1
    24
    Quote Originally Posted by troyheb View Post
    What year is your ski? I think Alex maybe sol. From what I have found it may not work on older RXP's Maybe just 2008 and newer.
    So on the older models its just not in the wiring?

  10. #10
    You can use the factory depth finder on older rxts but not rxps. You'll need to go aftermarket...like norcross marine.

    Mark

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Hawkeye depth finder on an '08 RXP-X?
    By Ziggy in forum Sea Doo Open Discussion
    Replies: 6
    Last Post: 08-15-2015, 10:42 PM
  2. installed aftermarket depth finder on my old RxP
    By sea-one in forum 4-Tec Performance
    Replies: 4
    Last Post: 10-15-2014, 08:21 PM
  3. Would like to put a depth finder on my 09 GTX
    By gutter in forum Sea Doo Open Discussion
    Replies: 1
    Last Post: 08-31-2010, 08:54 AM
  4. Depth finder on a 03 GTX SC
    By eckersjc2 in forum 4-Tec Performance
    Replies: 6
    Last Post: 07-01-2007, 12:27 PM
  5. Depth Finder on RXT
    By Sutto in forum Sea Doo How To & FAQs
    Replies: 7
    Last Post: 01-21-2006, 04:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •