Results 1 to 9 of 9
  1. #1
    wakejumper48's Avatar
    Join Date
    Sep 2010
    Location
    Florida
    Posts
    248
    +1
    3

    2011 rxt is engine code P1661?

    buddy has a brand new RXT nice jet ski good job seadoo it has engine light comes on and say matenace when u put a key on learners or normal and he went shut it off in the mid of the lake to swim and all that got back on starts up wont go to revers or forward stuck in neutral so to speak while he used my rxp to tow it in i was playing with display and got it to say fault code P1661 any one know what that is? and iBR light is on to... software update ? how do i know what software is in it any way of telling? only 2 hours on it

    ---------- Post added at 10:39 PM ---------- Previous post was at 10:33 PM ----------

    sry RXT aS


  2. #2

    Join Date
    Jan 2009
    Location
    Qatar
    Posts
    63
    P1661 - Bilge pump shorted to 12v
    P0106 - Manifold atmospheric pressure sensor out of range
    P0107 - Manifold atmospheric pressure sensor or Manifold barometric pressure sensor shorted to ground
    P0108 - Manifold atmospheric pressure sensor or Manifold barometric pressure sensor shorted to 12V or open circuit
    P0111 - Intake manifold temp sensor faulty
    P0112 - Intake manifold shorted to ground
    P0113 - Intake manifold shorted to 12V or open circuit
    P0116 - Engine temp sensor faulty
    P0117 - Engine temp sensor shorted to ground
    P0118 - Engine temp sensor shorted to 12V or open circuit
    P0122 - TPS out of range - short to ground
    P0123 - TPS out of range - short to 12V or open circuit
    P0231 - Fuel pump shorted to ground or open circuit
    P0232 - Fuel pump shorted to 12V
    P0261 - #1 injector short to ground or open circuit
    P0262 - #1 injector shorted to 12V
    P0264 - #2 injector short to ground or open circuit
    P0265 - #2 injector shorted to 12V
    P0267 - #3 injector short to ground or open circuit
    P0268 - #3 injector shorted to 12V
    P0236 - Knock sensor out of range
    P0336 - Crank position sensor - wrong RPM detected
    P0337 - No CPS signal, but CAPS signal detected
    P0339 - Crank signal fault not plausible with cam signal
    P0344 - Cam phase sensor signal missing
    P0351 - Ignition coil #1 open circuit or shorted to ground or to 12V
    P0352 - Ignition coil #2 open circuit or shorted to ground or to 12V
    P0353 - Ignition coil #3 open circuit or shorted to ground or to 12V
    P0461 - Fuel level sensor circuit out of range
    P0462 - Fuel level sensor shorted to ground
    P0463 - Fuel level sensor circuit shorted to 12V or open circuit
    P0505 - DLA output stage cutoff memory circuit or output stage fault or open circuit or short to 12V
    P0513 - Incorrect DESS key
    P0520 - Oil pressure switch faulty
    P0544 - Exhaust gas temperature sensor faulty
    P0545 - Exhaust gas temperature switch shorted to ground
    P0546 - Exhaust gas temperature switch shorted to 12V or open circuit
    P0562 - Battery voltage too low
    P0536 - Battery voltage too high
    P0600 - CAN communication problem detected by EMS or MPEM
    P0601 - TPS learns unlikely or checksum fault
    P0602 - ECU not coded
    P0604 - RAM faulty
    P0605 - EEPROM faulty
    P0605 - Checksum fault EEPROM
    P0608 - Sensor 5V power supply short to ground
    P0608 - Sensor 5V power supply short to 12V
    P0616 - Starter relay short to ground or open circuit
    P0617 - Starter relay short to 12V
    P1102 - TPS adaption failure
    P1104 - TPS adaption cancelled
    P1148 - Fuel injector 1,2 or 3 - safety fuel cutoff disabled
    P1200 - Blow-by valve shorted to ground or open circuit
    P1201 - Blow-by valve shorted to 12V
    P1202 - Oil tank pressure switch implausible or blow-by valve still closed
    P1502 - TOPS functional problem
    P1509 - Lake temperature circuit out of range
    P1510 - Lake temperature circuit low voltage
    P1511 - Lake temperature circuit high voltage
    P1513 - Exterior temperature circuit low voltage
    P1514 - Exterior temperature circuit high voltage
    P1517 - Compass out of range
    P1590 - VTS position sensor out of range
    P1591 - VTS position sensor - low voltage
    P1592 - VTS position sensor - high voltage
    P1593 - VTS malfunction
    P1607 - MPEM fault
    P1611 - P+ Test of ISC output signal failed
    P1655 - DESS line shorted to 12v
    P1656 - DESS line shorted to ground
    P1660 - Bilge pump shorted to ground or open circuit
    P1661 - Bilge pump shorted to 12v
    P1670 - Buzzer – short to battery voltage
    P1675 - Spare output 1 shorted to ground or open circuit
    P1676 - Spare output 1 shorted to 12V
    P1678 - Spare output 2 shorted to ground or open circuit
    P1679 - Spare output 2 shorted to 12V
    P1680 - Communication problem detected by MPEM
    P1681 - Communication problem - instrument cluster message missing
    P1682 - Communication problem - EMS message missing
    P1683 - COM RAM fault
    P1690 - VTS control up circuit open circuit or shorted to ground
    P1691 - VTS control up circuit shorted to battery
    P1692 - VTS control down circuit open circuit or shorted to ground
    P1693 - VTS control down circuit shorted to battery

    If you get the following codes, check to see if you have…
    P0344, P1200 - Burnt TOPS 10A fuse
    P1675 - Burnt depth gauge or spare 2A fuse
    P0353, P0267 - Burnt cylinder #3 ignition coil and injection 10A fuse
    P0352, P0264 - Burnt cylinder #2 ignition coil and injection 10A fuse
    P0351, P0261 - Burnt cylinder #1 ignition coil and injection 10A fuse
    P1680, P1681 - Burnt information center 1A fuse
    P0616 - Burnt Bilge pump, beeper, diagnostic center 3A fuse
    P1678 - Burnt spare 5A fuse
    P0231 - Burnt starter, fuel pump 10A fuse
    P0600 - Burnt MPEM 2A fuse
    P1690, P1692 - Burnt VTS 7.5A fuse

  3. #3
    wakejumper48's Avatar
    Join Date
    Sep 2010
    Location
    Florida
    Posts
    248
    +1
    3
    O wow thxs that helps alot
    Where's the battery and all the fuses at on theses IS skis I haven't looked for them but seems like there covering everything up in front like rxp or ?

  4. #4
    mrbtd's Avatar
    Join Date
    Jul 2005
    Location
    Lindenhurst, Illinois, United States
    Posts
    4,309
    +1
    2
    Quote Originally Posted by wakejumper48 View Post
    O wow thxs that helps alot
    Where's the battery and all the fuses at on theses IS skis I haven't looked for them but seems like there covering everything up in front like rxp or ?
    Really should consult the manual for a question like that.

  5. #5
    stuckmoto's Avatar
    Join Date
    Jun 2010
    Location
    Newark, De
    Posts
    1,485
    +1
    59
    My manual for my 2010 RXTX says code P1661: iBR malfunction
    Possible cause = iBR fault detected by ECM. iBR in limp home mode, verify fault code from iBR.
    Service action = Remove DESS key. Perform an electrical system shutdown. Clear fault.
    -iBR jammed in upper or lower position.
    -Verify CPS and brake lever sensor connection.
    -Refer to shop manual for details.

    ~directly to the dealer I would go with this one....

  6. #6
    wakejumper48's Avatar
    Join Date
    Sep 2010
    Location
    Florida
    Posts
    248
    +1
    3
    They can't find the manual and I'm an hour away we didn't get it out of the water last night till dark so I didn't even have time to look for it and they don't kno where to look I guess I'll look this weekend if I get over there

    ---------- Post added at 09:09 AM ---------- Previous post was at 08:46 AM ----------

    I think it's jammed there's no damage but u give it alot of gas it's in reverse and backs up a lil and on the screen where it says R N or F it's a line. Is there a way to unjam it like release on it or something ? Electrical shut down disconect batt or ? What I think happend is they pulled on it or something and jammed it..

  7. #7
    wakejumper48's Avatar
    Join Date
    Sep 2010
    Location
    Florida
    Posts
    248
    +1
    3

    the truth is out

    went over yesterday and and got them to tell me what happed they had 2 skis back to back holding each other trading drivers or something a boat wave came the other jet ski landed on top of the back of the revers gate which i see now the guard is broken
    read in manual which they couldnt find when i was on the phone with them ...its tells u how u go in settings and set the VTS buttons up to test reverse gate and i did moves up about 3in down about 5in not enofe so i wounder if i should pull it apart and check the mottor on and ever thing see whats jamming it..

  8. #8
    stuckmoto's Avatar
    Join Date
    Jun 2010
    Location
    Newark, De
    Posts
    1,485
    +1
    59
    Yea I would tear it apart to see how bad the damage is....

  9. #9
    Any word on this? I'm getting the same error code.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Question regarding Maintenence light and IBR ssue on an 2011 RXT IS
    By Zoo Keeper in forum Sea Doo Open Discussion
    Replies: 12
    Last Post: 12-01-2017, 09:18 PM
  2. 2011 rxt-is code p1614 and Ic pressure test question
    By BEECHFRONT in forum 4-Tec Performance
    Replies: 0
    Last Post: 08-20-2014, 05:07 PM
  3. 2011 RXT iS first ride
    By gentletiger in forum Sea Doo Open Discussion
    Replies: 3
    Last Post: 06-10-2011, 02:28 PM
  4. Just bought a 2011 RXT is 260
    By gbest in forum Sea Doo Open Discussion
    Replies: 2
    Last Post: 03-08-2011, 02:25 PM
  5. RXT IS error code
    By mazdaspd96 in forum 4-Tec Performance
    Replies: 0
    Last Post: 08-29-2009, 03:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •