Thread: 4" intake kit
11-20-2006, 11:36 AM #1
4" intake kit
has anyone put together a 4" intake kit that I can buy complete I would thing with as many people running a 4" there might be a kit by now.
are you guys running a filter if so which one and where did you get it, I am thinking of getting the SC adapter and running the hose (which I am not sure which one) up to the front vent hole under the glove box on my RXT
11-20-2006, 11:46 AM #2
I havent seen a kit put together yet. I bought my filter at autozone. They have a nice stainless steel mesh one for about $49. Make sure its not that paper cone BS....It has to be SS mesh!....
Last edited by GeoRXT; 11-20-2006 at 11:58 AM.
11-20-2006, 11:54 AM #3
There is no kit cause it falls under DYI and is so simple. heres is what I used.
1 adapter from RXPBlast or other substitue adapter from Home Depot
2. lenght of hose from Dultimeir Sales 1-800-553-6975 I used KA-620WD-4
3 a filter you can get at auto zone (no cotton all SS)
4 piece of PVC from Home Depot to go in the filter and give the hose something to clamp to
5 Jazz Catch Can for the breather hose that normally goes into the air intake
Once you get in all the supplies your ready and it is simple to install
11-20-2006, 12:13 PM #4
What do you guys do with the stock air intake after this mod is done?
11-20-2006, 12:15 PM #5
put it in a box with all the other discarded (block-offs,Sponsons, Exhaust restricter etc) parts to live out a nice life of retirement
11-20-2006, 12:50 PM #6
If you have an RXP this is about the best you are going to get for a 4" intake kit. The home made ones work great too for those on a budget.
11-20-2006, 01:12 PM #7
I would rather buy that Riva kit, you know it will work 100% and also you don't have to look around for parts IMO.
11-20-2006, 01:21 PM #8
The Riva intake is probably the best for maximum air intake. But you also have to consider your riding style and conditions. If you do alot of wave jumping or organized racing, you risk water ingestion with a rear air intake. And with crappy drive shaft seals (stock or a/m), sinking with a rear air intake would not be fun. But for mostly smooth water drag racing, it's a good set up.
11-20-2006, 02:35 PM #9
I wish they would make a kit like that for the RXT
11-20-2006, 02:47 PM #10
- Join Date
- Jul 2006
I'm sure they will
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By holdnon72 in forum Sea Doo Sport BoatsReplies: 23Last Post: 06-23-2008, 09:06 PM
By Green Hulk in forum 4-Tec PerformanceReplies: 69Last Post: 03-09-2008, 04:11 PM
By 05blastsrt4 in forum Kawasaki Open DiscussionReplies: 1Last Post: 07-24-2007, 09:43 PM
By JimC in forum 4-Tec PerformanceReplies: 6Last Post: 06-26-2007, 08:42 PM
By brad2510 in forum 4-Tec PerformanceReplies: 8Last Post: 02-21-2006, 06:27 PM