11-20-2006, 09:54 PM #1
- Join Date
- Oct 2006
Ski's off to paint any body have any handle bars?
Well the ski off for paint it going in a glossy black finish I'll keep you posted about the finish. after its out the motor's getting ported/reeds/fly wheel key/and hopefully this advent ignition will be out. I'll be puttting factory pipes on it. i'm shooting for 80+ we'll see .
by the way anybody has any handle bars for sale or swap ect???
11-20-2006, 10:00 PM #2
11-20-2006, 11:53 PM #3
I have some gold ones I will be swapping them out soon with some blue ones I bought. I also have the adapters for the larger bars to use with stock steering ODI grips included. I will post picture once I find one.
I replaced those old bolts with some nice stainless ones that Picture was to show HydroToys that I got them out without drilling.
Tha bars can be used with or without the QSTS
Last edited by OsideBill; 11-21-2006 at 12:08 AM.
11-21-2006, 02:54 AM #4
hi bill if mike not interested in fat gold bars and adaptors pm me..
11-21-2006, 10:35 AM #5
SaltyGPR if Mikegpr03 does not want them they are yours. These are a matte or textured finish bar not smooth polish finish. The Grips are ODI Rogue grips and are bolt on they are nice grips. I believe the mounting brackets are called Moose clamps but I may be wrong. I will have to ask Hydrotoys for the brand name and style of the bars. I do know they are ATV bars which work best for the watercraft.
11-21-2006, 12:10 PM #6
Mike, just a thought about your bars. IF and only IF you want to still utilize the stock trim assymbly on the left side of the bars, be sure to get motorcycle bars that are at least 31 inches across (wide) and check to see where the bend starts because you most likely will still want the start/stop switch attached next to the trim on the left side.
You will want enough room to fit both without having to worry about attaching the start/stop over a "bending" area.
Here are some pics of mine. The bars were 60 bucks at a dirt bike shop.
ALSO: Here is a thread that i did to show the complete process of putting aftermarket bars on your boat. >>>> http://www.greenhulk.net/forums/showthread.php?t=7302
HERE IS ANOTHER ONE: >>>> http://www.greenhulk.net/forums/showthread.php?t=7191
Hope this will help you a bit. Good luck.
11-21-2006, 07:05 PM #7
Where did you pick up the two piece metal trim ring? It looks great - much better than leaving a big opening.
BTW - great looking ski, you've inspired me to get busy taking mine apart for painting.
If you are looking for stock handle bars, you can have the one I just took off my '04 GPR.
11-21-2006, 07:53 PM #8
That little invention is from "Nater785". He had these made himself and sold a few of them here on the forum. I am sure he still has the resources to get these done, you might want to shoot him a PM. Mine was 60 dollars i think, it was a good deal - i do remember that.
11-26-2006, 06:46 PM #9
sorry it took so long but here you go
11-26-2006, 07:25 PM #10
- Join Date
- Oct 2006
wow! thats on the money thanks Shooter!!! I think I'll go with white.
it more classy i think
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By herbie1222 in forum Sea Doo ClassifiedsReplies: 2Last Post: 11-16-2012, 08:25 AM
By Extrememotors in forum 4-Tec PerformanceReplies: 1Last Post: 05-18-2008, 10:25 AM
By Bone1050 in forum Other ToysReplies: 18Last Post: 12-12-2007, 11:33 PM
By Bone1050 in forum Polaris Open DiscussionReplies: 30Last Post: 11-10-2007, 10:04 PM
By BULLRAIDER in forum Yamaha PWC Performance (2-stroke)Replies: 18Last Post: 07-06-2006, 03:23 PM