Results 1 to 4 of 4
  1. #1

    How do you remove the yellow plastic pieces off of a 2006 gp1300r??

    I have found 5 bolts total. They are all out, The piece still seems to be stuck at the top and I am too afraid to pull too hard. I already did once and a small piece of black plastic fell out. I am needing to get both sides off since the ski is to be repainted. I do not want to break them! Any help would be great!


  2. #2
    Happily Self-Employed WFO's Avatar
    Join Date
    Nov 2005
    Location
    Houston, Texas
    Posts
    12,799
    +1
    449
    Quote Originally Posted by K-Dubb View Post
    I have found 5 bolts total. They are all out, The piece still seems to be stuck at the top and I am too afraid to pull too hard. I already did once and a small piece of black plastic fell out. I am needing to get both sides off since the ski is to be repainted. I do not want to break them! Any help would be great!
    2 screws in bucket area, 2 screws in footwell area, 1 screw by glovebox

    one hand in the front, inside top by the bucket- and one hand inside top by the glove box

    yank straight out horizontally hard, like you dont care if you break anything

    lol

    and you will think you broke something, but thats normal

  3. #3
    Quote Originally Posted by WFO View Post
    2 screws in bucket area, 2 screws in footwell area, 1 screw by glovebox

    one hand in the front, inside top by the bucket- and one hand inside top by the glove box

    yank straight out horizontally hard, like you dont care if you break anything

    lol

    and you will think you broke something, but thats normal
    I figured that was the answer...Great...

    Thanks for the reply!

    ---------- Post added at 04:06 PM ---------- Previous post was at 03:33 PM ----------

    Well I got them off. I broke the middle clip on each side. Hopefully it won't matter when they go back on..

  4. #4
    Happily Self-Employed WFO's Avatar
    Join Date
    Nov 2005
    Location
    Houston, Texas
    Posts
    12,799
    +1
    449
    Quote Originally Posted by K-Dubb View Post
    I figured that was the answer...Great...

    Thanks for the reply!

    ---------- Post added at 04:06 PM ---------- Previous post was at 03:33 PM ----------

    Well I got them off. I broke the middle clip on each side. Hopefully it won't matter when they go back on..
    they will still attach

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How Do You Remove The Fuel Trap Door on a 2001 GP1200R??
    By stepjl in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 07-16-2015, 01:11 PM
  2. How do you remove the 2 red wires off the starter relay?
    By synergy141 in forum 4-Tec Performance
    Replies: 5
    Last Post: 07-14-2011, 04:53 PM
  3. How do you remove the exhaust pipe on a 00 Virage?
    By chvscks319 in forum Polaris How To & FAQs
    Replies: 6
    Last Post: 07-24-2009, 10:58 AM
  4. How do you remove the STARTER on a 96 XP?
    By BartenderSmalley in forum Sea Doo Open Discussion
    Replies: 8
    Last Post: 08-04-2008, 02:27 PM
  5. how do you remove the opas
    By jonstephens in forum 4-Tec Performance
    Replies: 2
    Last Post: 07-14-2005, 06:07 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •