Results 1 to 10 of 10
  1. #1
    gie187's Avatar
    Join Date
    Oct 2008
    Location
    Lake Winnipesaukee (in NH)
    Posts
    60

    2008 speedster 215 supercharger.

    Did the 2008 version have ceramic washers?


  2. #2
    davidvieira's Avatar
    Join Date
    Mar 2008
    Location
    Booksville, Fl
    Posts
    54
    Yes, in 2008 all boats had ceramic washers. All 2008 skis had metal washers. The boats didn't get the metal washers until 2009.

  3. #3
    gie187's Avatar
    Join Date
    Oct 2008
    Location
    Lake Winnipesaukee (in NH)
    Posts
    60
    O. Shit..... how hard is it to replace them?

    ---------- Post added at 11:57 PM ---------- Previous post was at 11:43 PM ----------

    "These are direct replacements for the original ceramic clutch washers that are prone to fail on modified engines." - my engine has no mods? am I fine with ceramic washers?

  4. #4
    jtmoney33's Avatar
    Join Date
    Apr 2007
    Location
    Belleville MI
    Posts
    106
    Does not matter if you have mods on your boat or not, they can still fail. If your not sure on how to change out the washers, you can always send them to Jerry (the site owner) and he can change them out for you for a small fee. Well worth it fyi

  5. #5
    Agreed with above....pull out the supercharger and send it to Jerry, he will replace and inspect. There is a thread which is very detailed on how to pull it out!! It doesn't look too difficult.

  6. #6
    TheElite0ne's Avatar
    Join Date
    Jan 2009
    Location
    Tampa, FL
    Posts
    383
    +1
    20
    Theres only 3 bolts holding the supercharger to the engine.... However you have to remove the air intake and loosen the exhaust in order to get to the bolts. Its not to hard... just takes time.

  7. #7
    gie187's Avatar
    Join Date
    Oct 2008
    Location
    Lake Winnipesaukee (in NH)
    Posts
    60
    If I sent it to Jerry how long would it take? I'm in New Hampshire.

    And could you guys just post a link to Jerrys info.

  8. #8
    I am in Rhode Island and I sent mine to Jerry. He took about 10 days to get it back to me.

  9. #9

    2008 Speedster 200 SC Washers

    Hey I thought I'd post this for you to see. I just pulled mine today and I'm almost certain these are ceramic. I have the S200 so it was twice the work . Not that bad really...more intimidating than anything else and then the Lord's prayer as I pulled them out !

    Off to Jerry they go.....
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Speedster SC .jpg 
Views:	195 
Size:	103.8 KB 
ID:	236554  

  10. #10
    gie187's Avatar
    Join Date
    Oct 2008
    Location
    Lake Winnipesaukee (in NH)
    Posts
    60
    I think I am going to remove them myself. Wish me luck.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB 2008+ Speedster 150 Supercharged - near Minneapolis
    By tchies in forum Sea Doo Sport Boats
    Replies: 0
    Last Post: 06-02-2015, 09:34 AM
  2. P1116 Engine Error - 2008 Speedster 150 /215 Supercharged
    By papasmurf in forum Sea Doo Sport Boats
    Replies: 5
    Last Post: 07-31-2014, 09:48 AM
  3. P1116 Engine Error - 2008 Speedster 150 /215 Supercharged
    By papasmurf in forum Sea Doo Open Discussion
    Replies: 0
    Last Post: 07-27-2014, 01:42 PM
  4. Replies: 7
    Last Post: 04-21-2011, 08:56 AM
  5. No beep, 2008 speedster 215 SC
    By dieselnick in forum Sea Doo Sport Boats
    Replies: 8
    Last Post: 07-21-2008, 11:07 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •