Results 1 to 6 of 6
  1. #1
    hitman's Avatar
    Join Date
    Aug 2006
    Location
    Ft. Lauderdale, FL
    Posts
    4,328
    +1
    12

    intermediate housing help

    I've have a leaking intermediate housing on my ski now for quite some time. It seems to spin fine, but is definitely leaking and pushing water and grease from the housing into my hull. Do I just replace the entire thing? Or can I just pull it apart and put in new seals? Any advise will help me.


  2. #2
    Happily Self-Employed WFO's Avatar
    Join Date
    Nov 2005
    Location
    Houston, Texas
    Posts
    12,801
    +1
    450
    Quote Originally Posted by hitman View Post
    I've have a leaking intermediate housing on my ski now for quite some time. It seems to spin fine, but is definitely leaking and pushing water and grease from the housing into my hull. Do I just replace the entire thing? Or can I just pull it apart and put in new seals? Any advise will help me.
    you can rebuild it, without replacing the entire thing

    you may want to pull it apart and see what parts you need

    the last one I rebuilt needed the shaft replaced and the rubber cushion was seperating from the bearing housing

  3. #3
    305coco's Avatar
    Join Date
    May 2007
    Location
    cape coral, florida USA
    Posts
    2,362
    +1
    55
    todd if you cant rebuild yours or its to much $$ to fix i have a complete assembly for sale

  4. #4
    hitman's Avatar
    Join Date
    Aug 2006
    Location
    Ft. Lauderdale, FL
    Posts
    4,328
    +1
    12
    Thanks for the info guys. I'll get that thing out either tonight or tomorrow and see what the deal is. Jorge, I'll shoot ya a PM.

  5. #5

    Join Date
    Aug 2008
    Location
    Southern Florida
    Posts
    5,589
    +1
    345
    Quote Originally Posted by hitman View Post
    Thanks for the info guys. I'll get that thing out either tonight or tomorrow and see what the deal is. Jorge, I'll shoot ya a PM.
    Translation: the day before I leave for mudbug.

  6. #6
    SHOBiz's Avatar
    Join Date
    Jul 2008
    Location
    Wylie, Texas
    Posts
    3,577
    Quote Originally Posted by WFO View Post
    you can rebuild it, without replacing the entire thing

    you may want to pull it apart and see what parts you need

    the last one I rebuilt needed the shaft replaced and the rubber cushion was seperating from the bearing housing
    That shaft ain't cheap either.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Please help - Intermediate housing leak
    By Rock918 in forum Yamaha PWC Performance (4-stroke)
    Replies: 4
    Last Post: 06-16-2016, 07:20 AM
  2. Leak at rear of Yamaha SUV Intermediate housing help?
    By macGruber in forum Yamaha PWC Performance (2-stroke)
    Replies: 13
    Last Post: 04-30-2012, 01:01 PM
  3. intermediate housing
    By tubetent in forum Yamaha How To & FAQs
    Replies: 6
    Last Post: 02-25-2009, 10:29 AM
  4. GPR Intermediate housing question
    By mrbtd in forum Yamaha Open Discussion
    Replies: 2
    Last Post: 04-10-2008, 01:04 PM
  5. Intermediate Housing
    By JKR1300 in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 10-30-2006, 05:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •