Results 1 to 4 of 4
  1. #1

    How do you remove the OEM sound supression box?? (installing pump tunnel kit)

    I do not see how you can do this. i have the sound suppression box disconnected from the waterbox. However, the rear of the sound suppression is connected in the back, and the screw head is faced the other way. There is no way I can get to do it. How am I supposed to remove it without cutting it?


  2. #2
    rangermtb5's Avatar
    Join Date
    Apr 2008
    Location
    North Jersey
    Posts
    4,473
    +1
    58
    Quote Originally Posted by K-Dubb View Post
    I do not see how you can do this. i have the sound suppression box disconnected from the waterbox. However, the rear of the sound suppression is connected in the back, and the screw head is faced the other way. There is no way I can get to do it. How am I supposed to remove it without cutting it?
    You are trying to remove the whole system from the ski?

    Here is what I was told to do: Unbolt the exhaust outlet that goes through the hull. Then you can remove the entire system, outlet, hose, and box out of the ski.

    The only issue with doing this is that you will most likely break at least one of the bolts holding the outlet on. You may get lucky and not break any, but it's unlikely especially if you are in salt water.

    If you do it this way, I would replace all 3 bolts and the gasket around the outlet too.

  3. #3
    I was able to remove no problem. Thanks!

  4. #4
    rangermtb5's Avatar
    Join Date
    Apr 2008
    Location
    North Jersey
    Posts
    4,473
    +1
    58
    Quote Originally Posted by K-Dubb View Post
    I was able to remove no problem. Thanks!
    Cool, no problem. Make sure that gasket sits right when you re-assemble.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How Do You Remove The Fuel Trap Door on a 2001 GP1200R??
    By stepjl in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 07-16-2015, 01:11 PM
  2. How do you remove the fairings on GPR?
    By Gus13letter in forum Yamaha How To & FAQs
    Replies: 7
    Last Post: 02-21-2011, 03:42 PM
  3. How do you remove the exhaust pipe on a 00 Virage?
    By chvscks319 in forum Polaris How To & FAQs
    Replies: 6
    Last Post: 07-24-2009, 10:58 AM
  4. How do you remove the STARTER on a 96 XP?
    By BartenderSmalley in forum Sea Doo Open Discussion
    Replies: 8
    Last Post: 08-04-2008, 02:27 PM
  5. how do you remove the opas
    By jonstephens in forum 4-Tec Performance
    Replies: 2
    Last Post: 07-14-2005, 06:07 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •