11-25-2006, 03:09 PM #1
- Join Date
- Jun 2006
Need stock jetting for 2000 GPR 1200
Can anyone tell me the stock jetting for a 2000 GPR 1200?? Thanks, David
11-25-2006, 03:36 PM #2
Most people with a few mods Compression 140-150 psi, D-plate, etc. are running 1.5 N&S dull spring 110 pilot 120 mains Accelerator pump disabled on stock carbs with aftermarket F/A's. Prok seems to be the popular choice on the F/A's
11-25-2006, 04:29 PM #3
Thats fine and dandy, but what is the stock jetting for a gpr1200?
11-25-2006, 04:41 PM #4
From the manual
N&S 1.2mm pilot 95 mains 117.5 does not give any spring data
11-25-2006, 07:59 PM #5
yeah, I looked at the manual earlier. I guess he has them at stock jetting. Dave left you a message, Mike aligned your motor tonight. So now we just have to put the reeds in, the intake plate, then the carbs, hook everything up, then put your carbs in. Going to put your carbs back together tonight. Hope to have it done by tonight. So we are good to go.
11-26-2006, 12:17 AM #6
11-26-2006, 12:15 PM #7
I wouldn't consider it gold, but its apple green.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By TILERYBOY2 in forum Yamaha ClassifiedsReplies: 3Last Post: 06-21-2010, 02:15 PM
By TILERYBOY2 in forum Yamaha PWC Performance (2-stroke)Replies: 0Last Post: 06-20-2010, 10:11 PM
By KawieGuy in forum Yamaha ClassifiedsReplies: 0Last Post: 10-17-2008, 02:14 PM
By walstar in forum Yamaha ClassifiedsReplies: 0Last Post: 05-29-2008, 04:02 PM
By shooter98xpl in forum Yamaha PWC Performance (2-stroke)Replies: 3Last Post: 12-05-2005, 08:53 PM