Results 1 to 8 of 8
  1. #1
    YudLuz2's Avatar
    Join Date
    Jun 2005
    Location
    Flowood MS
    Posts
    1,647
    +1
    110

    2001 GPR 1200 carbs, mainfold and flame adapters

    These are nice fresh water carbs from a 2001 GPR. They have been rejeted for a stage 1or two setup with low and high speed screws added. Jetting is 110/120 and 95 grams springs with 1.5 needle and seats. Around 65 hours. The chokes have been removed and replace with three primer fittings. The accelerator pumps have been removed and the inside restrictions on the carb mouth have been removed. That includes the choke stop and the front meter block has been reduce for a increase of airflow. Carbs were replace using NOVI 48's on the boat. But I have ran 89 mph with some just like these on a triple pipe big bore motor. The riva carb adapters are included, but I used the air filters on the new carbs. You could probably add these carbs without any adjustments, they were pulled off a stock 1200 motor with a milled head running 75 mph. Price is $400 plus shipping. Ben
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	077.jpg 
Views:	67 
Size:	64.8 KB 
ID:	237848   Click image for larger version. 

Name:	063.jpg 
Views:	75 
Size:	62.8 KB 
ID:	237849   Click image for larger version. 

Name:	068.jpg 
Views:	89 
Size:	70.9 KB 
ID:	237850  


  2. #2

    Join Date
    Apr 2006
    Location
    South MS
    Posts
    1,095
    Nice carbs!

  3. #3
    will you sell just the adaptors?

  4. #4
    Moderator OsideBill's Avatar
    Join Date
    Mar 2006
    Location
    United States
    Posts
    11,875
    +1
    30
    Dibs for now have someone looking for a set and waiting to hear back from him. I will let you know for sure in less then an hour.

    ---------- Post added at 01:34 PM ---------- Previous post was at 12:11 PM ----------

    Ben, I talked to Leonard and he wants them as is with the adapters, and will contact you directly. Thanks Bill

  5. #5
    YudLuz2's Avatar
    Join Date
    Jun 2005
    Location
    Flowood MS
    Posts
    1,647
    +1
    110
    Bill, Just got off the phone with Lee, there sold to him pending payment.
    Thanks Ben

  6. #6
    leejax01's Avatar
    Join Date
    Apr 2011
    Location
    Jacksonville
    Posts
    1,161
    +1
    98
    Thanks.

  7. #7
    Moderator OsideBill's Avatar
    Join Date
    Mar 2006
    Location
    United States
    Posts
    11,875
    +1
    30
    Quote Originally Posted by YudLuz2 View Post
    Bill, Just got off the phone with Lee, there sold to him pending payment.
    Thanks Ben
    Thanks Ben, Lee is a good guy.

  8. #8
    Cool, not that you made this sale Ben lets get some tunning in (smile)(my smiles are gone) I'm anxious as hell, nice carbs btw.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2001 GPR 1200 hull FS
    By itzmunch in forum Yamaha Classifieds
    Replies: 4
    Last Post: 07-26-2008, 10:25 PM
  2. GPR 1200 carbs 2001 45mph
    By crmikey47 in forum Yamaha PWC Performance (2-stroke)
    Replies: 7
    Last Post: 07-13-2008, 02:58 PM
  3. 2001 gpr 1200 pump
    By daddyville in forum Yamaha Classifieds
    Replies: 3
    Last Post: 06-24-2008, 08:42 PM
  4. GPR 1200 steering cable and trim cables
    By YOUNGGUNZ403 in forum Yamaha Classifieds
    Replies: 2
    Last Post: 06-09-2008, 05:53 PM
  5. xlt / Gpr 1200 carbs needed
    By mjet in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 07-10-2007, 12:37 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •