Results 1 to 1 of 1
  1. #1

    Join Date
    Sep 2006

    01 RX fresh 993 motor $1800

    Very clean RX with 90 hours. Motor completely pulled down and rebuilt summer of 2010. Motor is now a 993 (1mm overbore), and has been jetted following the "Ben's secret mods" post on GreenHulk (also the accel pumps are disabled). It has a RXX flame arrestor on it and I have a pair of after market intake grates (worx) to go with it, one is a scoop and the other is modified open style for smooth water and top speed. Otherwise, ski is stock and in VGC. I rode it a whopping 30 minutes last year after the build. The motor is still very tight and needs to be broken in. The rings are set well and the jetting is very close, but I have not run it enough for the motor to loosen up to start testing the jetting. That being said, it will need to be run easy for a while longer and then checked for jetting. Right now it feels a little rich on the bottom end, and it transitions into the midrange Really hard, but I was backing off at that point to prevent seizing a new motor. If I get time in the next week I will take it to the lake and run it some more. I found a nice Blaster last year right after I finished this so it just sat. I ride the Blaster whenever I can get a few minutes of time to myself. Otherwise I'm pulling the kids on wakeboards in the boat or working. This is a really nice ski I built for myself, but It seems I end up riding by myself allot and the Blaster is more fun to me. I have the trailer for an additional $250 if you need it. Clear titles to both.
    (804) 467-2204
    Mechanicsville, VA.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	01rx1.JPG 
Views:	51 
Size:	71.1 KB 
ID:	238197   Click image for larger version. 

Name:	01rx2.JPG 
Views:	40 
Size:	62.4 KB 
ID:	238198  

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 16
    Last Post: 08-17-2011, 03:41 PM
  2. Mobil 1 4T 10W-40 syn in the 1800 yamaha motor
    By big john in forum Yamaha PWC Performance (4-stroke)
    Replies: 2
    Last Post: 06-27-2011, 08:22 PM
  3. WTB wtb yamaha 1300 155hp motor need for xr 1800
    By TDSTYG in forum Yamaha Classifieds
    Replies: 5
    Last Post: 11-11-2010, 11:52 PM
  4. FS 96 SL700 Fresh motor and electronics
    By 03stage2 in forum Polaris Skis
    Replies: 0
    Last Post: 04-28-2010, 09:54 AM
  5. Getting cold , fresh air into the I wrong?
    By 05rxt in forum 4-Tec Performance
    Replies: 12
    Last Post: 06-15-2005, 05:51 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts