Results 1 to 6 of 6
  1. #1

    2003 gpr1200 carb rebuild for dummies (triples)

    hey can anybody post up here the exact procedure for rebuilding/modifying the stock gpr carbs into triple pipe capable beasts the carbs I am using has an accel pump that squirts into all 3 carbs, I'm unsure of the jet sizes and springs and so on, but am hoping to cap the unessasery bits of, im going to be running premix and removing the chokes, can anybody explain the procedure with photos so I can run my new FP triples


  2. #2
    smacota1's Avatar
    Join Date
    Sep 2009
    Location
    South of Mason Dixon
    Posts
    1,162
    +1
    36
    Quote Originally Posted by Little Josh View Post
    hey can anybody post up here the exact procedure for rebuilding/modifying the stock gpr carbs into triple pipe capable beasts the carbs I am using has an accel pump that squirts into all 3 carbs, I'm unsure of the jet sizes and springs and so on, but am hoping to cap the unessasery bits of, im going to be running premix and removing the chokes, can anybody explain the procedure with photos so I can run my new FP triples
    Here is some good reading

    http://www.greenhulk.net/forums/show...r-pump-removal

    http://www.greenhulk.net/forums/show...throttle-shaft

    http://www.greenhulk.net/forums/show...-Valve-Install

    http://www.greenhulk.net/forums/show...-and-wrong-way!

    http://www.greenhulk.net/forums/show...on-Carb-Issues

    http://www.greenhulk.net/forums/show...am-With-Return.


    Once you have read all these and more, ship to Osidebill for peace of mind. He will do a great job for you.

  3. #3
    Moderated
    Join Date
    Oct 2006
    Posts
    3,711
    + 1 on osidebill

    shipping each way is about 150 AUD total, give or take and well worth it.

  4. #4
    guys I can't afford $300 just for shipping alone! I've added up it'll cost about $195 in parts. I'd rather build them myself, nothing against oside bill he's great I'm just in to much debt to dad atm :/

  5. #5
    Moderated
    Join Date
    Oct 2006
    Posts
    3,711
    its about 65-80 each way......not 150 each way.

  6. #6
    I would still rather spend $195 all up instead of $320. that's why I asked if anybody can give me a heads up step by step. I think I know what to do but any advice or tips are appreciated

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Question on carb rebuild for xlt-1200
    By littlejohn in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 07-04-2014, 02:15 PM
  2. stock carb rebuild for '01 gp1200r..do i need to adjust pop off?
    By waterman74 in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 09-18-2013, 08:31 PM
  3. Yamaha 800pv Carb Set for parts/rebuild from 2003 800xlt
    By jetmaniac in forum Yamaha Classifieds
    Replies: 8
    Last Post: 09-13-2009, 06:25 PM
  4. carb rebuild kit for sl750
    By Polaaron in forum Polaris How To & FAQs
    Replies: 4
    Last Post: 08-13-2007, 10:46 PM
  5. Need carb rebuild kit for '98 GP800
    By qbzonk in forum Yamaha Open Discussion
    Replies: 3
    Last Post: 12-15-2006, 07:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •