05-09-2011, 07:55 AM #1
Custom XS Intercooler stuff $90 shipped
This is a partial kit and is not complete. If you are not the DIY type this isnt for you.
Bracket to hold XS cooler. Cradle style
2 3 to 2.5 reducing coupler (black)
1 2.5" straight Coupler (black)
1 I/C pipe for throttle body side (may need trimming)
2 3" T-Bolt clamps for I/C side
You will need at least a 45 degree pipe for the S/C side and the 2.5" t-bolt clamps.
I didnt end up using this stuff because I went with a custom exhaust set up to keep the noise level down (see pic 1). It just to tight with this bracket.
Cradle is for the Type 3 I/C @ silicne intakes or the same on eBay (around $100). Same dimensions as the fizzle kit so if you have the older fizzle bracket this is a good replacement (will need to rework piping of course).
Would be a great start for a conversion set up also.
05-09-2011, 11:14 AM #2
edit for some other couplers and clamps I had.
05-31-2011, 10:02 AM #3
06-06-2011, 09:58 PM #4
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By SlowStang305 in forum Sea Doo ClassifiedsReplies: 7Last Post: 01-13-2012, 11:07 AM
By Pooche in forum 4-Tec PerformanceReplies: 7Last Post: 09-27-2009, 08:49 PM
By mrbtd in forum Sea Doo ClassifiedsReplies: 3Last Post: 02-27-2009, 10:42 AM
By BobOnThis in forum Sea Doo ClassifiedsReplies: 0Last Post: 07-20-2008, 09:36 PM
By marc777 in forum Sea Doo ClassifiedsReplies: 0Last Post: 06-09-2008, 11:11 PM