Thread: Pro 785 carb linkage question?
05-09-2011, 12:50 PM #1
Pro 785 carb linkage question?
The pro ran great this past weekend, especially now that I have adjusted the auto drop nozzle where it is not plowing me thru the water at max downward trim,
I noticed on my carb linkage that the PTO carb wide open stop hits about 1/8 turn before the rest do?
Is there some way to adjust that so the other 2 get full open? at the same time?
05-09-2011, 01:03 PM #2
Yes, there is a set screw on each carb that allows you to synchronize the carbs and then another set screw on the PTO end which adjusts you idle.
05-09-2011, 02:54 PM #3
I think my set screw is on the mag carb for idle, but I going off of memory,
05-09-2011, 03:13 PM #4
Glad the help with your drop nozzle helped. Can you get a picture with the carbs are WOT?
Also it looks from the gray fuel line on the top left you still have your fuel ON/OFF switch still installed. I would bypass that.. It restricts the fuel from the tank to the carbs. "Only a suggestion"
05-09-2011, 10:21 PM #5
I thought about by passing the fuel cut off, but I didn't want fuel leaking if I had a worn needle seat?
picture coming wed. we have a little league game tuesday after work, thanks,
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By skigolfnut in forum Polaris Open DiscussionReplies: 4Last Post: 10-19-2011, 07:24 PM
By jcjw1998 in forum Polaris Open DiscussionReplies: 3Last Post: 09-07-2010, 09:58 PM
By mccann316 in forum Polaris ClassifiedsReplies: 2Last Post: 04-26-2010, 08:04 PM
By billybobtucson in forum Polaris PWC PerformanceReplies: 12Last Post: 10-01-2009, 01:21 PM
By JGringo in forum Polaris Open DiscussionReplies: 4Last Post: 07-16-2008, 10:33 PM